Toshiba Tecra A8 Maintenance Manual page 56

Maintenance manual
Hide thumbs Also See for Tecra A8:
Table of Contents

Advertisement

2 Troubleshooting Procedures
DC IN icon
Lights green
Flashes orange
Doesn't light
*1 When the Power Supply Controller (PSC) detects a malfunction, the DC IN icon blinks
orange. It shows an error code.
When the icon is blinking, perform the following procedure.
1.
Remove the battery pack and the AC adapter.
2.
Re-attach the battery pack and the AC adapter.
If the icon is still blinking after the operation above, check the followings:
Check 1
If the DC IN icon blinks orange, go to Procedure 2.
Check 2
If the DC IN icon does not light, go to Procedure 3.
Check 3
If the battery icon does not light orange or blue, go to Procedure 4.
NOTE: Use a supplied AC adapter G71C0004A510 (3-pin)/ G71C0002SC10 (2-pin).
2-8
[CONFIDENTIAL]
Table 2-2 DC IN icon
DC power is being supplied from the AC adapter.
There is a problem with the power supply. *1
Any condition other than those above.
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
2.3 Power Supply Troubleshooting
Power supply status

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tecra a8 seriesSatellite pro a120

Table of Contents