Toshiba Tecra A8 Maintenance Manual page 305

4.25 LCD unit/FL inverter
8. Disconnect the LCD cable from the connector CN5000 on the system board. (When
the cover assembly is removed first, the LCD cable is already disconnected.)
9. Remove the following screws and LCD unit.
•
M2×3C
CAUTION: When lifting up the top of the LCD unit, hold the corners of the LCD unit.
The top edge of LCD unit is sensitive area.
LCD unit
M2×3C BIND
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
BIND screw
Hook
Figure 4-39 Removing the LCD unit
4 Replacement Procedures
×4
M2×3C BIND
CN5000
[CONFIDENTIAL]
LCD cable
4-59