Toshiba Tecra A8 Maintenance Manual page 270

4 Replacement Procedures
Installing the Optical drive
To install the optical drive, follow the steps below and refer to Figure 4-12 and 4-13.
1. Set the mounting plate and secure it with the following screw.
•
M2×3C
2. Set the pushing plate and secure it with the following screws.
•
M2×2.7C
3. Insert the optical drive firmly into the computer to connect it to the connector on the
system board.
4. Stick the insulator in place.
5. Turn over the computer and secure the optical drive with the following screw.
•
M2.5×6B
4-24 [CONFIDENTIAL]
BIND screw
S-THIN HEAD screw
FLAT HEAD screw
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
4.8 Optical drive
×1
×2
×1