Table of Contents
Advertisement
■
Language
Select the language to be used for the projector menus.
4. When you're finished, press
Viewing Lamp Usage and Other
Information
Use the Info menu to view information about the display settings of
your computer and the number of hours the lamp has been used.
1. Press the
button and select the
Menu
displaying the following information:
■
Lamp Hours
Displays the number of hours the lamp has been used. The
life span of the lamp ranges from about 3000 hours in
brightness mode to about 4000 hours in
mode. If the number shown is close to 3000 or the
information is displayed in red, make sure you have a spare
lamp handy.
■
Source
Displays the input source currently being projected.
■
Input Signal
Displays the input signal setting.
■
(computer, RGB video, and component video)
Resolution
Displays the input resolution.
■
Video Signal
Displays the video signal format.
■
Refresh Rate
Displays the refresh rate.
■
(computer, RGB video, and component video)
Sync Info
Provides information that may be needed by the service
technician.
or
Esc
Menu
Info
(computer, RGB video, and component video)
(composite and S-Video)
(computer, RGB video, and component video)
.
menu. You see a screen
High
brightness
Low
note
You can make changes to
many of the signal settings on
the Signal menu. See page 58
for details.
note
The lamp usage timer doesn't
register until you've used the
lamp for at least 10 hours.
Fine-tuning the Projector
65
Advertisement
Table of Contents
