Table of Contents
Advertisement
Check the Signal menu to make sure the correct input source is
■
selected. See page 58.
If you're using a PC laptop:
Hold down the
■
Fn
display on an external monitor. It may have an icon such as
or it may be labelled
projector to sync up after pressing it. Check your laptop's manual
or online help for details.
On most systems, the
between the LCD screen and the projector, or display on both at
the same time.
If you're projecting from a laptop, and you don't see the same
■
image on the projection screen and computer screen, check your
monitor settings to make sure both the LCD screen and the
external monitor port are enabled.
From the Control Panel, open the
tab, then click
Settings
the settings varies by brand; you may need to click a
then make sure the external Monitor port is set as your primary
display and/or enabled. See your computer's documentation or
online help for details.
key and press the function key that lets you
. Allow a few seconds for the
CRT/LCD
or
CRT/LCD
Display
. The method for adjusting
Advanced
key lets you toggle
utility. Click the
tab,
Monitor
Projecting
35
Advertisement
Table of Contents
