Table of Contents
Advertisement
note
The default setting for the
option
Startup Screen
menu is
. If the
ON
Startup
is set to
, the
Screen
OFF
logo will not display at
startup.
If the User's Logo Protect
function has been set to
ON
the
Display Background
setting cannot be changed.
You need to turn the protect
function off first. See page 69
for details.
Once you've saved a user's
logo, you cannot reset the logo
setting to its factory default
(no logo).
note
If a password has already
been set, you see the
Password Protect Release
screen. See "Starting the
Projector with a Password"
on page 70.
Fine-tuning the Projector
68
7. When you see this screen, select a zoom rate (display size), and
then press
Enter
8. When you see the message
and press
Yes
not use the projector or other sources (computer, video, etc.)
,
while the logo is being saved.
9. When you see the message
10. To display the logo as the background screen when the
button is pressed, select the
11. Select
Display
12. Select Display
and press
Enter
13. When you're finished, press
Setting a Password
1. Press the
Freeze
until you see the Password Protect menu:
.
Save image as user's logo?
. Saving the logo takes a few moments. Do
Enter
Completed
Extended
and press
.
Enter
and press
Background
.
to exit the menus.
Menu
button on the remote control for about 7 seconds
, select
, press
.
Esc
A/V Mute
menu and press
Enter
. Then select
Enter
Logo
.
Advertisement
Table of Contents
