Table of Contents
Advertisement
Fine-tuning the Projector
54
4. After highlighting the option you want to adjust, use the
button on the remote control or left or right arrow buttons
Vol+
on the projector to change the setting. In some cases, you may
have to press the
Enter
the setting.
Press the
■
Vol–
left or right arrow buttons on the projector to adjust a slider
bar.
To select from two or more settings, use the
■
buttons or arrow buttons to highlight the desired setting,
then press
Enter
5. Press the
button to return to the previous menu or to close
Esc
the menu system if you are at the main menu. Your changes are
saved automatically.
6. Press the
button to exit the menu system.
Menu
button to see a sub-screen for changing
or
button on the remote control or the
Vol+
.
or
Vol–
or
Vol–
Vol+
Advertisement
Table of Contents
