Sleep Operation - Sharp AN-PR1500H Operation Manual

Sleep operation

The radio, discs and USB can all be turned off automatically.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
button to select "SLEEP", and
press the MEMORY/DIMMER button.
4
Press the or button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
3 hours - 5 minutes 5-minute intervals
5 minutes - 1 minute 1-minute intervals
5
Press the MEMORY/DIMMER button.
"SLEEP" will appear.
6
The unit will enter the power stand-by mode automatically after
the preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes.
To confirm the remaining sleep time:
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
"X : XX" is sleep remaining time.
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time whilst it is displayed by pressing the
MEMORY/DIMMER button (steps 4 - 5).
or
button to select "SLEEP X : XX".
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by mode, proceed
as follows.
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
the MEMORY/DIMMER button.
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up to CD the next
morning.
1 Set the sleep time (see left, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback (steps 2 - 10, pages 57 - 58).
Sleep timer setting
Timer playback setting
1 minute - 3 hours
Sleep operation will
automatically stop
button to select "SLEEP OFF", and press
End time
Desired time
Timer playback start time
AN-PR1500H
59