Advanced Usb Playback - Sharp AN-PR1500H Operation Manual

To remove USB memory device
AN-PR1500H
(continued)
Notes:
SHARP will not be held liable for the loss of data whilst the USB memory device is
connected to the audio system.
Files compressed in MP3 and/or WMA format can be played back when
connected to the USB terminal.
This USB memory's format support FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory devices will work on this audio
system.
This USB memory cannot be operated via USB hub.
If "UNSUPPORT WMA" is displayed, it means "Copyright protected WMA file" is
selected.
The USB terminal in this unit is not intended for a PC connection but is used for
music streaming with a USB memory device.
The larger the capacity of the USB storage device, the longer it will take for the data
to be read.
Some USB multi-reader devices may not work correctly with the USB terminal on
this unit.
External storage devices cannot be played back using the USB terminal on this
unit.
This unit only supports "MPEG-1 Audio Layer-3" and "MPEG-2 Audio Layer-3"
format. (Sampling Frequency is 32, 44.1, 48kHz)
"MPEG-2.5 Audio Layer-3" and MP1, MP2 format are not supported.
Playlists are not supported on this unit.
The playback time may not be displayed correctly when playing back a variable
bitrate file.
The USB port is only intended for direct connection to a USB memory device
without any cable.
This product can play WMA and MP3 files. It will automatically detect the file type
being played. If unplayable file is played on this product, "NO SUPPORT" is
indicated and the file will be automatically skipped. This will take a few seconds. If
abnormal indications appear on the display due to the unspecified file, turn off the
unit and then turn it on again.
This product relates to USB mass storage devices and MP3 players. It may
however face some irregularities due to various unforeseen reasons from some
devices. Should this happen, turn off the unit and then turn it on again.
48

Advanced USB playback

Repeat play (REMOTE CONTROL ONLY)
Repeat play can play single track and all track sequence continuously.
1 2 3
4 5 6
7 8 9
0 +10
Whilst a disc is playing, each time the button is pressed, the repeat mode changes in
the following order:
In case of an USB mode:
REP: [REP 1] "1-REPEAT"
REP: [REP DIR] "FOLD REPEAT"
REP: [REP ALL] "ALL REPEAT"
REP: [OFF] "NORMAL"
Random play (REMOTE CONTROL ONLY)
The tracks can be played in random order automatically.
To random play all tracks:
Press the SHIFT and RANDOM buttons on the remote control so that random
indicator lights up in the display window.
Repeat the currently
playing track.
Repeat the currently
playing directory.
Repeat the currently
playing USB.
The normal playback.