Sharp HT-SL70 Operation Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Home Theater System
  5. HT-SL70
  6. Operation manual

Sharp HT-SL70 Operation Manual

Sound bar home theater system
Hide thumbs Also See for HT-SL70:
Table of Contents

Advertisement

Quick Links

See also: Operating Manual
MODEL
HT-SL70
SOUND BAR HOME THEATER SYSTEM
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read
this manual carefully. It will guide you in operating your SHARP product.
HT-SL50 Sound Bar Home Theater system consisting of Sound Bar and Subwoofer.
Notes:
●
This product is recommended for flat panel TV (LCD and plasma).
●
For HDMI connection, this product only supports PCM (Pulse Code Modulation) signals.
●
This product is controlled via HDMI CEC (Consumer Electronics Control) specification, therefore
for HDMI connection, your TV's CEC must be enabled.
●
For TV without HDMI CEC, headphone or RCA (variable output) analog connection is available.
●
For TV without HDMI, headphone or RCA (variable output) connection is required.
Recommended Connection:
TV Type
with HDMI
( ver1.4 with ARC)
with HDMI
HDMI TV without
CEC & ARC or non
HDMI TV
TINSZA914AWZZ

OPERATION MANUAL

CEC FUNCTION
MUST BE ENABLED
MUST BE ENABLED
NONE
CONNECTION
HDMI IN
(ARC)
HDMI IN
HEADPHONE OUT
RCA
(VARIABLE OUT)
ENGLISH
CONNECTION METHOD
Page 11, Method 1
Page 11, Method 2
Page 12, Method 1
Page 12, Method 2
Printed in Malaysia
11D R MW 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HT-SL70 and is the answer not in the manual?

Questions and answers

Related Manuals for Sharp HT-SL70

Summary of Contents for Sharp HT-SL70

  • Page 1: Operation Manual

    HT-SL70 SOUND BAR HOME THEATER SYSTEM Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. HT-SL50 Sound Bar Home Theater system consisting of Sound Bar and Subwoofer.
  • Page 2 (QCNWGA062AWPZ) (QCNWGA065AWPZ) Cushion (Bottom) x 4 (QCNWGA064AWPZ) (PCUSSA190AWZZ) Sound bar Stand x 4 Wall Mount Angle x 2 Pattern Paper Speaker Wire (LANGKA225AW01) (GITAUA012AWSA) (TCAUHA027AWZZ) (QCNWHA043AW01) Sound bar cover joint A Wall mount bracket Screw for brackets x 6 Sound bar Stand...

  • Page 3: Special Notes

    Special Notes CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...

  • Page 4: Important Safety Instructions

    Important Safety Instructions Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire.

  • Page 5: For U.s. Customer Only

    Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer.
  • Page 6 Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.

  • Page 7: Controls And Indicators

    6. AC Power Cord ......10 7. Speaker Terminal......10 8.

  • Page 8: System Preparation

    System preparation Make sure to unplug the AC power lead before installing the unit or changing the position. Select from three installation methods according to the preferred position. Using stand For 46" TV sound bar assembly 1. Pull out the cover of joint A (short) as below. Sound bar joint A 2.
  • Page 9 System preparation (continued) Using sound bar stand 1. Pull out the cover of sound bar stand as below. Cover 2. Slot in the sound bar into the sound bar stand and fix its cover as shown. 3. Slot in the sound bar to the base stand according to your TV size.

  • Page 10: Falling Prevention

    Do not let children dangle on the sound bar once it is attached on the wall as it can cause damage and injury. Driving screws SHARP designed the sound bar so you may hang them on the wall. Use proper screws (not supplied). See below for size and type.

  • Page 11: Placing The System

    (+) terminal. Caution: ● Use speaker with an impedance of 4 ohms or more, as lower impedance speaker can damage the unit. Notes: ● As the sound from the system is omni-directional, you can place the speaker anywhere you like.
  • Page 12 To listen to the sound from TV, some setting in the TV menu is needed. For details refer to the operation manual of the TV. ● If unable to select external speaker (for Sharp LCD TV, it is named as AQUOS AUDIO SP), turn OFF and ON the CEC. ●...
  • Page 13 System connections (continued) Connecting a TV (with AUDIO IN (TV)) Connect to the TV using an audio cable. 1. Method 1 To HEADPHONE terminal Audio cable Subwoofer To AUDIO IN (TV) input terminal 2. Method 2 To audio output terminal RCA cable Subwoofer To AUDIO IN (TV)

  • Page 14: General Control

    General Control Make sure to enable the HDMI CEC when making HDMI connection. To turn the power on Plug the AC power cord into an AC outlet, the stand-by indicator turns red. This unit will automatically power on if: 1. TV or similar component which supports HDMI CEC, is turned on.

  • Page 15: Troubleshooting Chart

    Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. General Symptom Possible cause ●...

  • Page 16: Specifications

    Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production unit. There maybe some deviations from these values in individual unit.

Table of Contents