AC power connection
Connecting the AC power lead
After checking all the connections have been made correctly, connect the AC power
lead to the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit will not be in use for a
prolonged period of time.
Wall socket
(AC 220 - 240 V ~ 50 Hz)
To turn the power on
Press the ON/STAND-BY button.
If the power does not turn on, check whether the power lead is plugged in properly.
To set the unit to stand-by mode:
Press the ON/STAND-BY button again.
Note:
After the unit enters the power stand-by mode, wait a few seconds to turn on again.
Demonstration mode
The first time the unit is plugged in, the unit will enter the
demonstration mode. You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode
(demonstration mode), press the SHIFT and DEMO
buttons on the remote control. The unit will enter the low
power consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the SHIFT and DEMO buttons
on the remote control again.
AN-PR1500H
17