Sharp AN-PR1500H Operation Manual page 56

Playing karaoke (continued)
AN-PR1500H
4
Press the DVD/CD, TUNER, USB or AUX button to select the audio
source and play it.
5
Adjust the volume of the audio source using the VOLUME control.
6
To control the volume of both microphones, press MIC VOL (+) to
increase and MIC VOL (-) to decrease.
7
Press the ECHO (+ or -) on the remote control whilst pressing
down the SHIFT button, to adjust the microphone echo.
Notes:
When you sing too loud through the microphone, your voice may be distorted
depending on the devices connected. If this happens, lower the microphone
volume.
If an extremely sensitive microphone is used, howling may be generated.
Unidirectional microphone is more appropriate for vocal use.
The volume of both microphones is set simultaneously. It is recommended to use
microphones of the same sensibility.
When you connect or disconnect a microphone, the sound is muted for a few
seconds.
If squealing occurs:
Reduce the microphone volume.
Change the direction of the microphone.
Reduce the volume of the main unit.
Move the microphone away from the speakers.
Keep microphones away from each other.
Caution:
When not using the microphone, remove it from the MIC socket.
When connecting or disconnecting the microphone, set the MIC VOLUME LEVEL
control to MIN.
When using only one microphone, unplug the other.
To change the audio mode/Bi-LANGUAGE
setting
Sound of the playback source can be switched among the STEREO, L-CH, R-CH, and
V-CANCEL (VOCAL CANCEL) modes.
The audio mode function is used when the left and right channels have individual
signals from each other.
Press the KARAOKE button on the remote control
until the desired audio mode is displayed.
Each time the KARAOKE button is pressed, the mode
will change as follows:
56
STEREO
L-CH
R-CH
V-CANCEL
Notes:
The initial audio mode setting is "STEREO".
In any mode other than the STEREO mode, "
The setting will remain unchanged when you change the disc, you set the unit to
the stand-by mode or the function is changed from the CD to another function.
When playing a sound multiplexed disc on which a vocal and music have been
separately recorded, select the audio mode as desired.
To change general stereo source to
karaoke source
Even ordinary discs not recorded specifically for karaoke can be used for karaoke just
by toning down the main vocal.
Press the KARAOKE button on the remote control until "V-CANCEL" appears in
the display.
Notes:
Use discs recorded in stereo. The function will not work with mono sources.
With some discs the original vocals may still be heard.
Notes on sound multiplexed karaoke discs:
Sound multiplexed karaoke discs are discs on which the main vocal and the BGM
(Background music) have been recorded on one of the two channels and only the
BGM on the other.
The function will not work properly with discs which do not belong to this group.
Discs on which vocal has been recorded on the left channel and music on the right
may not play properly.
1 2 3
4 5 6
7 8 9
0 +10
STEREO L-CH R-CH
Sounds on the left and right channels are played.
Sounds on the left channel only are played.
Sounds on the right channel only are played.
The main vocal is lowered.
" will appear.
V-CANCEL