Wireless Settings (Network Selector); Starting And Exiting - Sharp PG-M25X Software Manual

Wireless Settings (Network Selector)

Network settings are necessary for the projector and the computer to communicate via
a wireless LAN. If a wireless network connection has already been configured, you can
easily and quickly change the settings of a wireless LAN PC card installed in the
computer using "Network Selector". This function enables you to use the projector in a
wireless environment easily even if you have no experience with network settings.
"Network Selector" is not necessary if the wireless network has not yet been configured.
• If a wireless network has already been configured, you may use this software after
consultation with your Network Administrator.
• The only wireless cards that can be set with this software are the one included with
the projector, or the "Sharp AN-WC11B Wireless LAN PC Card" (sold separately).
Other cards cannot be set using this software.

1. Starting and Exiting

The following explains how to start and exit the "Network Selector" program.
Starting
1
Click the "Start" menu, "Programs", "Sharp Wireless Reality",
click "Network Selector".
The startup screen that shows the current network settings is displayed.
Exiting
1
Click "Close" on the startup screen.
This exits the program.
and then
-17