Connecting Easily Via A Wireless Lan (Quick Connection) - Sharp PG-M25X Software Manual

3. Connecting Easily via a Wireless LAN (Quick Connection)

The following explains how to connect to the projector via a wireless LAN.
CAUTION
• When using "Quick Connection" (DHCP) in a location already configured with a
wireless network, the pre-existing network may be affected. In this case, make sure
to consult with the Network Administrator.
• When the profile has been set to "Quick Connection (from DHCP server)", network
settings such as the IP address will be received from the projector. First start the
projector, and then the computer after "Standby" appears.
1
Turn the projector on, and reset the network settings on the projector.
1 On the projector, select "Reset" in the "Network" menu, and then press the
2 On the confirmation message, select "Yes", and then press the ENTER button.
3 Install the AN-WC11B Wireless LAN Card to the PC card slot (INPUT 4) on the
4 Wait until "Standby" is displayed.
For installing the wireless LAN card or menu operation, see the projector
operation manual.
2
Start the "Network Selector".
For details, see
3
Click the
the list.
The contents of the profile list may vary depending on your computer's operating
environment.
ENTER button.
projector.
"1. Starting and
next to the "Profile" field and select "Quick Connection" from
Exiting" on page 17.
-19