Displaying Still Image; Displaying Image Files - Sharp PG-M25X Software Manual

4. Displaying Still Image

The following explains how to display the computer screen on the projector as a still
image. Different from the real time display, this mode transfers the computer screen
image one time. This function is useful when giving explanations about each screen
during a presentation.
1
Display the screen you want to send on the computer.
2
Press the "Single Transfer" key (the "Print Screen" key on the computer
keyboard right after installation).
The screen currently displayed in the computer is sent to the projector.
The "Single Transfer" key can be set to any key. For details, see
Settings" on

5. Displaying Image Files

The following explains how to display image files stored in a computer and projecting
them via the projector.
The image files that can be sent are as follows:
• Non-compressed Bitmap files (.BMP)
• JPEG files
• VQ files (.VQ)
• Non-compressed TIFF (.TIF)
More than two image files cannot be sent at a time.
There are three ways to send image files.
page 35.
(.JPG or .JPEG)
"6. Changing
-31