Sharp PG-M25X Software Manual page 20

4
Click "Change Network".
The "Confirmation" dialog box is displayed.
If "Change Network" appears gray, "Quick Connection" has already been set.
Click "Close", and exit "Network Selector".
5
Click "Yes".
The computer restarts.
The computer settings will be changed after restarting the computer, and you can
connect to the projector via a wireless LAN.
The network settings for "Quick Connection" are as follows:
I
IP Address
Subnet Mask
Gateway
Channel
SS ID
DHCP Server function
Assign start address
Number of maximum addresses
that can be assigned
I On the computer:
IP Address
Subnet Mask
Gateway
Channel
SS ID
Transmission mode
Encryption
-20
On the projector:
192.168.150.150
255.255.255.0
192.168.150.1
11ch
SHARP_PRJ
On
192.168.150.151
10 addresses
From DHCP Server
From DHCP Server
From DHCP Server
11ch
SHARP_PRJ
802.11 AdHoc mode
None