Using EMP NetworkManager
You can use EMP NetworkManager to send messages by e-mail,
notifying you when a problem occurs with a projector. Before running
EMP NetworkManager, make sure you've installed the software as
described on page 114. Then follow the steps below to create e-mail
settings for each projector you want to monitor.
Selecting the Projectors to Monitor
1. To start EMP NetworkManager, click
All Programs > EPSON Projector > EMP NetworkManager
You see the EMP NetworkManager screen. The projectors you've
already registered through EMP Monitor appear as icons.
2. If you'd like to register a projector manually and you know its IP
address, double-click the
You see this screen:
3. Enter the projector's IP address and click
icon is added to the EMP NetworkManager screen.
Start > Programs
Projector address selection
. The projector's
Add
or
.
icon.
Managing Projectors
89