Epson PowerLite 830p User Manual page 19

3. If the light is orange, press the red P
Power
top of the projector—or press the P
control to turn on the projector. The projector beeps once and the
light flashes green as it warms up.
Power
(If this is your first time using the remote control, make sure the
batteries are installed and the
remote is turned on.)
The projector adjusts the focus and then displays your image. The
light stops flashing and remains green.
Power
4. If you've connected a Windows-based computer to the projector,
you may see a New Hardware Wizard screen saying your
computer has found a plug-and-play monitor; if so, click
5. If you are prompted to enter a password, see page 68.
Power
button on the remote
Power
switch on the side of the
ON/OFF
Power button
button on
warning
Never look into the lens
when the lamp is on. This
can damage your eyes, and is
especially dangerous for
children.
Power button
Turn on
remote
note
To conserve electricity and
make the lamp last longer,
you can enable the Sleep
Mode function. This feature
.
Cancel
turns off the lamp and
reduces power consumption
whenever the projector has
not received any signals for
30 minutes. See page 75 for
more information.
Displaying and Adjusting the Image
19