Using Emp Networkmanager; Selecting The Projectors To Monitor - Epson PowerLite 7800p User Manual

Using EMP NetworkManager

You can use EMP NetworkManager to send out messages by e-mail,
notifying you when a problem occurs with a projector. Before running
EMP NetworkManager, make sure you've installed the software as
described on page 76. Then follow the steps below to create e-mail
settings for each projector you want to monitor.

Selecting the Projectors to Monitor

1. To start EMP NetworkManager, click
All Programs > EPSON Projector > EMP NetworkManager
You see the EMP NetworkManager screen. The projectors you've
already registered through EMP Monitor appear as icons.
2. If you'd like to register a projector manually and you know its IP
address, double-click the
icon.
You see this screen:
Start > Programs
Proj(ector) address selection
Managing the Projector from a Remote Computer
or
.
87