Epson PowerLite 830p User Manual page 107

If you're using Macintosh OS 8.6 to 9.x:
1. From the Apple menu, select
Monitors and Sound
2. Click the
Arrange
3. Drag one monitor icon on top of the other. This lets you display
on the projector screen as well as the LCD screen.
4. If this option isn't available, click the
5. Select one of the listed
seconds for the projector to sync up after making the selection.)
The message
Not Supported
Make sure the correct input signal is selected in the Signal menu
■
(see page 63).
Make sure your computer's resolution doesn't exceed UXGA
■
×
(1600 1200) and the frequency is supported by the projector
(see page 119). If necessary, change your computer's resolution
setting as described below.
Only part of the computer image is displayed.
Press the button on the remote control.
■
Auto
Make sure the image
■
menu. See page 64 for more information.
Make sure your computer's resolution setting is correct. Ideally, it
■
×
should be 1024 768 to match the projector's native resolution.
If this option isn't available, select one of the other compatible
video formats listed on page 119.
Windows:
■
Right-click the desktop, select
tab, and select a different resolution.
■ Macintosh OS X:
Open
System Preferences
different resolution.
Control Panels
.
icon.
Monitor
resolutions. (Allow a few
Simulscan
is displayed.
setting is correct on the Signal
Position
Properties
, click
Displays
, then click
icon.
, click the
Settings
, and select a
Solving Problems
107