Adjusting Color Corrections For A New Surface; Operating Your Computer With The Remote Control - Epson PowerLite 830p User Manual

Adjusting Color Corrections for a New Surface

Adjust the correction values if you're projecting on a new surface or in
a new location.
1. Press the
Wall Shot
while you're projecting an image. Make sure Wall Shot is on.
2. Press the
Wall Shot
Shot Readjustment
your screen.
You see a sequence of colors flash for about five seconds as the
projector adjusts the color correction values for the new
projection surface.
Operating Your Computer with the
Remote Control
If you've connected a computer to the projector with a USB cable, as
described on page 49, you can use the remote control in place of your
computer's mouse. This gives you more flexibility when delivering
slideshow-style presentations, since you won't have to stand next to
the computer to change slides.
■ Use the buttons to move through a slideshow.
Page
Page up or down
to change slides
in PowerPoint
button on the remote control or projector
button a couple of times until you see
as the status in the upper right corner of
Wall
Using the Remote Control
41