To Resume Playback After Stopping (Resume Play); Dvd Mode Operation Indicators - Sharp DV-SL2000W Operation Manual

DVD playback (continued) DVD playback (continued)
DV-SL2000W
To interrupt playback
Press the 3/8 (PLAY/PAUSE) button.
To resume playback from the same point, press the 3/8 (PLAY/PAUSE) button.
To stop playback
DVD/Audio CD/JPEG/VCD/DivX:
Press the 7 (STOP) button twice.
When the unit is left unoperated for more than 3 minutes after pressing the 7
(STOP) button, a screen saver appears (see page 21 when the screen saver
setting is "ON").
Press any button on the main unit or remote control. The startup screen
returns.
Caution:
I Close the disc tray when not in use. Otherwise, dust may accumulate inside
and cause malfunction.
I The unit gets slightly warm when used for a long time. It does not mean the
unit is damaged.
I When attempting to play disc with scratches or of a different region number,
or unplayable or restricted (*1) discs, an error message will appear on the
TV display and the disc will not play.
(*1) Viewing is prohibited on some DVDs according to the audience age.
Notes:
I During disc initialisation, the volume cannot be adjusted.
I Stop positions may be recorded on some discs. When you play such a disc,
playback stops there.
I During an operation, " " may appear indicating that the operation is disabled
by the disc.
I The main unit detects loaded discs automatically and then the indicators
light up.
DV-SL2000
27
SVCD VCD CD
PULL OPEN
To resume playback after stopping
H
(resume play)
You can resume playback from the point playback is stopped.
1
Whilst a disc is playing, press
the 7 (STOP) button.
The system stores the point you
stopped.
2
To restart play, press the
Play resumes from the point you stopped.
To cancel the resume playback:
Press the 7 (STOP) button twice.
Notes:
I The resume playback feature is disabled on some discs.
I Depending on the disc, playback may resume from slightly before the
stopped position.

DVD mode operation indicators

H
The following are examples of operation indicators that appear during DVD playback.
Operation TV screen
When the power is
NO DISC
on without a disc
Disc data is being
DISC LOADING
read
1st time Stop 7
PRESS PLAY TO CONTINUE
2nd time Stop
STOP
Play
PLAY
Pause
PAUSE
PRESS PLAY TO CONTINUE
3 8
button.
/ (PLAY/PAUSE)
Unit display