Setting The Clock (Remote Control Only); Dvd Playback - Sharp XL-E171DVH Instructions Manual

Setting the clock (Remote control only)

In this example, the clock is set for the 24-hour (00:00) display.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the ENTER button. To adjust
the day, press the
ENTER button.
4
Press the or
hour display and then press the ENTER button.
The 24-hour display will appear.
(00:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
5
To adjust the hour, press the
press the ENTER button. Press the
once to advance the time by 1 hour. Hold it down to
advance continuously.
6
To adjust the minutes, press the
then press the ENTER button. Press the
button once to advance the time by 1 minute.
To confirm the time display:
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
Note:
When power supply is restored after unit is plugged in
again or after a power failure, reset the clock (page 37).
To readjust the clock:
Perform "Setting the clock" from step 1. If the "Clock" does
not appear in step 2, step 4 (for selecting the 24-hour or
12-hour display) will be skipped.
To change the 24-hour or 12-hour display:
1
Clear all the programmed contents. [Refer to "Factory
reset, clearing all memory" on page 37 for details.]
2
Perform "Setting the clock" from step 1 onwards.
or button and then press the
button to select 24-hour or 12-
or button and then
or
or button and

DVD playback

■ Playback
1
Press the ON/STAND-BY button to turn the power on.
2
When the input is not set to the disc
mode, press the DVD button on
remote control to display the startup
screen.
The startup screen appears.
3
Press the
control to open the disc tray.
4
Place the disc on the disc tray, label side up.
5
Press the
Discs supporting auto start will start to play once you
close the disc tray even if you do not press the
( / ) button.
button
6
If playback does not start in step 5, press the
( / ) button.
To interrupt playback:
or
Press the
To resume playback from the same point, press the
( / ) button.
To stop playback
DVD:
Press the
Audio CD/MP3/DivX:
Press the
JPEG:
Press the MENU/PBC button to stop JPEG viewing and
return to menu view.
When the unit is left unoperated for more than 5 minutes in
a stop mode, a screen saver appears (see page 9 when
the screen saver setting is "ON")
Press any button on the main unit or remote control. The
startup screen returns.
Caution:
● Close the disc tray when not in use. Otherwise, dust
may accumulate inside and cause malfunction.
● The unit gets slightly warm when used for a long time.
It does not mean the unit is damaged.
● When attempting to play discs with scratches or of a
different region number, or unplayable or restricted (*1)
discs, an error message will appear on the TV display
and the disc will not play.
(*1) Viewing is prohibited on some DVDs according to the
audience age.
E-15
OPEN/CLOSE on the main unit or remote
OPEN/CLOSE button to close the disc tray.
/ ( / )button.
button twice.
button.
/
/
/