The region number for this DVD player is 2. NTSC/PAL If you require any advice or assistance regarding your Sharp product, please visit our web-site www.sharp.co.uk/support. Customers without Internet access may telephone 08700 100484 during office hours(or (01) 8781630 if telephoning from Ireland).
SAFETY INFORMATION This equipment complies with the requirements of WARNING: Directives 89/336/EEC and 73/23/EEC as amended by TO REDUCE THE RISK OF FIRE OR ELECTRIC 93/68/EEC. SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO Dieses Gerät entspricht den Anforderungen der EG- RAIN OR MOISTURE.
Page 3
Act 1956, the Dramatic and Musical Performers cabinet, unplug the Player immediately and contact the Protection Act 1958, the Performers Protection Acts 1963 retailer or service centre approved by SHARP immediate- and 1972 and to any subsequent statutory enactments and orders.
PRECAUTIONS Connection to power SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
ABOUT THE DISCS Playable Discs The following discs can be played back on this DVD player. ¡ ¡ ¡ ¡ ¡ ¡ DVD video DVD-R/RW* Audio CD CD-R/RW* MP3* Video CD *Depending on the types or the writing method of the medium some discs cannot be played. •...
FUNCTIONAL OVERVIEW FRONT PANEL OPERATE OPEN/CLOSE PLAY STOP SKIP REAR VIEW AV (TV) DIGITAL VIDEO S-VIDEO AUDIO OUT VIDEO OUT 13 14 1. OPERATE 10. MAIN (AC Power Cord) to switch the player to ON or OFF connect to a standard AC outlet 2.
REMOTE CONTROL 1. OPERATE Button [page 13] Press to turn the power on and off. OPERATE OPEN/ 2. ON SCREEN Button [page 16] SETUP CLOSE SCREEN Displays the current status on the TV screen for checking purposes. 3. DIMMER Button [page 19] DIMMER GAMMA MODE...
FUNCTIONAL OVERVIEW Display Stays on when repeat chapter function is on. Stays on when repeat Stays on when repeat track function is on. title function is on. Stays on when Lights up when a DVD the repeat function is on. is inserted on the tray.
SETTING UP YOUR DVD PLAYER If your TV has two SCART sockets DVD Player AV (TV) DIGITAL VIDEO S-VIDEO AUDIO OUT VIDEO OUT To AV OUT SCART SCART OUTPUT SCART Cable CAUTION: (commercially available) To SCART • Do not connect the Player output to a VCR.
SETTING UP YOUR DVD PLAYER Connecting to Audio Equipment Connecting the Player to audio equipment provides normal stereo sound plus powerful stereo sound enhanced by Dolby Digital (5.1 channel), DTS, and MPEG Audio. Playing 2 channel audio C C Analogue audio connection To AUDIO (Red) (White)
CONNECTIONS - TV, VCR, DIGITAL SET TOP BOX - AND DVD PLAYER Back of TV DVD PLAYER AV (TV) DIGITAL VIDEO S-VIDEO AUDIO OUT VIDEO OUT SCART Cable (commercially available) AV/TERMINAL (AV-2) Satellite dish Aerial Euro-SCART Aerial IN (RGB) AV/TERMINAL Aerial Lead (AV-1) (commercially available)
PLAYING A DISC Basic Playback Pause DVD-RW DVD-RW VR mode VR mode Getting started During playback, press STILL/PAUSE. • Turn on the power of the TV, amplifier and any other com- • Playback will pause and sound will be muted. ponents which are connected to the DVD.
PLAYING A DISC Step by Step Playback Fast Forward / Reverse Search DVD-RW DVD-RW VR mode VR mode During playback, press STILL/PAUSE. During playback, press FWD g or REV h repeatedly to select the required forward or reverse • Playback will pause and sound will be muted. speed: x2, x8, x50, x100.
PLAYING A DISC Repeat Track • REPEAT are available only during playback. without PBC function REPEAT TITLE / CHAPTER There are three ways to begin playback on an Audio CD or Video CD at a specific Track. DVD-RW Using the numerical key pad VR mode To activate the repeat function, press REPEAT during Press the numerical key pad to enter the desired...
PLAYING A DISC Programme MP3 Playback You may determine the order in which tracks will play. When a CD with MP3 files is inserted in the DVD player, the In stop mode press MODE. MP3 menu will appear on the TV screen, and number of tracks is displayed on the front panel.
PLAYING A DISC Track Selection Stereo Sound Mode Press DIRECT SKIP during playback. Press AUDIO repeatedly during playback to select between STEREO, L-CH or R-CH. • The FILE LIST will appear. Select a desired track using Arrow (L/K/B/s). STEREO - both right and left channels are active (stereo) •...
PLAYING A DISC Changing the On-Screen Display Digital Gamma Setting DVD-RW DVD-RW VR mode You can check information about the current disc by pressing VR mode DIGITAL GAMMA is a digital image quality enhancement ON SCREEN on the remote control. function that gives a richer image by brightening the darker Press ON SCREEN during and more obscure portions of the image without altering the...
DVD SETUP Audio Setting IF YOU FORGET THE PASSWORD Choose the appropriate settings for best sound reproduction in the PARENTAL LEVEL section Press 4, 7, 3, 7 at step dependent on your externally connected equipment. • Password will be cleared and parental level will be set to These settings only affect DVD audio playback.
DVD SETUP Language Setting Language options are not available with some discs. Press SETUP in STOP mode. Press B to select (CUSTOM), then press ENTER. • On screen menu will appear. Press s or B to select (LANGUAGE), then press ENTER to confirm. Press K or L to select the below items, then press ENTER.
Where this is not possible please visit our web-site www.sharp.co.uk/support. Customers without Internet access may telephone 08700 100484 during office hours (or (01) 8781630 if telephoning from...
SPECIFICATIONS PRODUCT TYPE CONNECTIONS DVD Player AUDIO/VIDEO 21 pin scart socket x 1 Video output x 1 DISCS S-Video output Mini DIN 4-pin jack (75 ohm) DVD video Analog audio output Two RCA connectors (one left Audio CD channel, one right channel) Video CD 2 Vrms (100 kilo-ohm) CD-R / RW...