To Remove Usb And Sd Memory Device - Sharp DV-SL2000W Operation Manual

To remove USB and SD memory device

1
Press the STOP 7 button on the remote control or 7 button
on the unit.
2
Disconnect USB or SD memory device from the terminal.
3
Close terminal door.
Notes:
I SHARP will not be held liable for the loss of data whilst the USB memory
device is connected to the audio system.
I This USB memory's format support FAT 16 or FAT 32.
I SHARP cannot guarantee that all USB memory devices will work on this
audio system.
I This USB memory cannot be operated via USB hub.
I If recorded file is not displayed in "ROOT" menu, it means that this format is
not supported.
I The USB terminal in this unit is not intended for a PC connection but is used
for music, video and image streaming with a USB memory device.
I The larger the capacity of the USB storage device, the longer it will take for
the data to be read.
I Some USB multi-reader devices may not work correctly with the USB terminal
on this unit.
I External storage devices cannot be played back using the USB terminal on
this unit.
I This unit only supports "MPEG-1 Audio Layer-3" format.
(Sampling Frequency is 32, 44.1, 48kHz)
"MPEG-2 Audio Layer-3", "MPEG-2.5 Audio Layer-3" and MP1, MP2 format
are not supported.
I Playlists are not supported on this unit.
I The display playback time may not be displayed correctly when playing back
a variable bitrate file.
DV-SL2000W
44