To Resume Playback After Stopping (Resume Play); Dvd Mode Operation Indicators; Playback - Sharp DV-SL1300W Operation Manual

DVD playback (continued)
DV-SL1300W
ENGLISH
To interrupt playback
Press the ENTER (38) button.
To resume playback from the same point, press the ENTER (38) button.
To stop playback
DVD/Audio CD/JPEG/VCD:
Press the STOP (7) button twice.
When the unit is left unoperated for more than 5 minutes after pressing the
STOP (7) button, a screen saver appears (see page 21 when the screen saver
setting is "ON").
Press any button on the main unit or remote control. The startup screen
returns.
When the unit is left unoperated for more than 20 minutes after pressing the
STOP (7) button, the unit will automatically change to power standby mode.
Press ON/STANDBY button to on the power.
Caution:
I Close the disc tray when not in use. Otherwise, dust may accumulate inside
and cause malfunction.
I The unit gets slightly warm when used for a long time. It does not mean the
unit is damaged.
I When attempting to play disc with scratches or of a different region number,
or unplayable or restricted (*1) discs, an error message will appear on the
TV display and the disc will not play.
(*1) Viewing is prohibited on some DVDs according to the audience age.
Notes:
I During disc initialisation, the volume cannot be adjusted.
I Stop positions may be recorded on some discs. When you play such a disc,
playback stops there.
I During an operation, "INVALID KEY" may appear indicating that the opera-
tion is disabled by the disc.
I The main unit detects loaded discs automatically and then the indicators
light up.
E-29
DV-SL777 25-39 29
To resume playback after stopping
H
(resume play)
You can resume playback from the point playback is stopped.
1
Whilst a disc is playing, press the
STOP (7) button.
The system stores the point you stopped.
2
To restart play, press the ENTER button.
Play resumes from the point you stopped.
To cancel the resume playback:
Press the STOP (7) button twice.
Notes:
I The resume playback feature is disabled on some discs.
I Depending on the disc, playback may resume from slightly before the
stopped position.

DVD mode operation indicators

H
The following are examples of operation indicators that appear during DVD

playback.

Operation TV screen
When power is
NO DISPLAY
standby
When the power is
NO DISC
NO DISC
on without a disc
Disc data is being
READ
read
Stop
PRE STOP
Stop (twice)
STOP
Play
SEQ PLAY
Pause
PAUSE
2/21/06, 5:14 PM
PRE-STOP
Unit indicator
ON/STANDBY
RED LED ON
PLAY/PAUSE
GREEN LED ON
PLAY/PAUSE
GREEN LED ON