Changing The Setup Menu - Sharp DV-SL2000W Operation Manual

Changing the setup menu

Turn on the TV, and switch the input to the "VIDEO 1", "VIDEO 2",
etc. accordingly.
1
Press the ON/STAND-BY button
to turn the power on.
I The startup screen appears.
I If the startup screen is blurred, press the
PAL / NTSC button repeatedly to change
the TV type.
2
Press the SETUP button.
3
Press the 5 or ∞ button to select
a menu and press the ENTER
button.
See the list on pages 21 - 24 for setup
menu.
4
Press the 5, 4, 2 or 3 button to
change the setting and press the
ENTER button.
I See the list on pages 21 - 24 for the
selectable parameters.
I Press the "MAIN PAGE" button and press
the ENTER button.
The main page returns.
5
Press the SETUP button.
I The setting is completed.
I To change other settings, begin from step 2.
Notes:
I During playback, "VIDEO SETUP" and "PREFERENCES" settings cannot be
changed.
I Settings are stored even if the unit is set to the stand-by mode.
I The backup function protects the stored settings for a few hours should there
be a power failure or the AC power lead disconnection.
DVD
DV-SL2000W
SETUP MENU -- MAIN PAGE
GENERAL SETUP
AUDIO SETUP
DIVX(R) REGISTRATION
VIDEO SETUP
PREFERENCES
EXIT SETUP
GENERAL SETUP
-- GENERAL PAGE --
ANGLE MARK ON
OSD LANG OFF
SCREEN SAVER
MAIN PAGE
GENERAL SETUP
20