Turning On Other Equipment - Epson 500c User Manual Supplement

caution
To avoid damaging the
lamp, never unplug the
power cord when the power
light is green.
Connecting to a Desktop Computer
16
When you are ready to turn off the projector, follow these steps:
1. Press the red
Power
see a confirmation message. (If you don't want to turn it
off, press any other button.)
2. Press the button again. The Power light flashes
Power
orange for about a minute and the fan gets louder as the
projector cools down. When the projector has cooled, the
orange light stays on and the fan shuts off.
If you want to turn the projector on again, wait until the
orange light stops flashing. Then press the
3. When you are finished using the projector, replace the lens
cap, retract the lens, and unplug the power cord.

Turning On Other Equipment

If you're using a VCR, other external video source, or
additional equipment with the projector, turn on the
equipment in this order:
1. Video source
2. External audio source
3. Projector
4. External speakers or PA system
5. Computer
When you're ready to shut down, turn off the equipment in the
reverse order.
button on top of the projector. You
Power
button.