Starting Elp Link Iv; Starting The Program From Windows - Epson PowerLite 5350 User Manual

Starting ELP Link IV

Follow the steps in the appropriate section below to launch the
software. If you're using the remote control as a mouse, use the Enter
button to position the cursor and click the Enter button to launch the
software.
Notes:
If you have a Macintosh, your screens may look slightly different than
the screens in this chapter.
If you have questions while working with ELP Link IV, online help is
available by choosing the Help Topics command from the Help
menu.

Starting the Program from Windows

1. If you have Windows 3.x, double-click the ELP Link IV program
icon in the Windows 3.x ELP Link IV program group. If you have
Windows 95, 98, or NT, click Start, then select Programs,
ELP Link IV, and then click the ELP Link IV program icon.
The ELP Link IV program icon appears minimized at the bottom
of your screen, or on the taskbar if you're running Windows 95,
98, or NT.
Starting ELP Link IV
105