Specifications - Sharp VL-E41X Operation Manual

Signal System:
Recording System:
Cassette:
Recording/Playback Time:
Tape Speed:
Pickup Device:
Lens:
Lens Filter Diameter:
Monitor:
Speaker Output:
Microphone:
External Microphone Input:
Colour Temperature Compensation:
Minimum Illuminations
Video Output Level
Audio Output Level
Power Requirement,
Power Consumption:
Operating Temperature:
Operating Humidity:
Storage Temperature:
Dimensions (approx.):
Weight (approx.):
AC Adaptor/Battery Charger Specifications
Power Requirement: AC 1 IO-240 V, 50/60 Hz
DC Output: 6.0 V
Power Consumption: 23 W
Dimensions (approx.): 70 x 44.3 x 165 mm (W/H/D)
Weight (approx.): 340 g
-AC ADAPTOR/
BATTERY PACK BT-77 BATTE
AUDIO/VIDEO CABLE
Some accessories may not be available in Australia/New Zealand.
Call 0055 36883-Australia only-for details.
Calls charged at 25@ per 21.4 set Charges advtsed at the start of each call
Design and specifications are subject to change without notice.
*Minimum illumination: Since there is no widely accepted testing procedure for determining minimum illumina-
tion capability, lux ratings are comparable only between models from the same manu-
facturer.
43
PAL standard
8 mm format, 2 rotary heads, helical scanning system
8 mm video tape, MP type
90 minutes (P5-90)
20.05 1 mm/second
6.4 mm (l/q") CCD image sensor
(with approx. 320,000 pixels including optical black)
8 x power zoom lens (F1.8, f = 4.5-36 mm), and full-range auto focus
37 mm
10.2 cm (4") full-colour LCD screen (TFT active matrix)
200 mW
Auto white balance
4 lux* (with gain-up)
1 .OVp-p 75-ohm unbalanced
DC 6.0 V
8.0 W (during camera recording in Full Auto mode with zoom motor off,
backlight in normal mode)
0°C to + 40°C
35% to 80%
-20°C to +6O"C
199 x 123 x 85.4 mm (W/H/D)
900 g (without battery pack, lithium battery and video cassette)
DC OUTPUT CABLE
LITHIUM BATTERY x2
INFRARED REMOTE
CONTROL
CLEANING CLOTH