Playback; Volume Control - Sharp VL-E41X Operation Manual

STOP 'button
VOLUME
Decrease Increase
25

PLAYBACK

The LCD monitor makes it possible to play back and
see what you have just recorded. Nothing needs to
be connected, allowing instant &-screen playback
You can hear the sound through the built-in speaker
or via your own earphone.
You can also watch prerecorded 8 mm video tapes
on this VIEWCAM ("On-the-Go Playback").
Set the Operate switch to VCR.
forward) the tape.
TO STOP PLAYBACK
Press the STOP button (@).
Auto Tape Rewind
The tape is automatically rewound when playback
reaches the end of the tape.
Notes:
If you wish to turn off the operation button indicators on
l
the monitor (e.g because they interfere with your view of
the picture), press the MODE DISPLAY button. The but-
tons will still function as indicated even after their indica-
tors are turned off.
A monaural earphone with a 3.5 mm diameter plug can
l
be plugged directly into the VIEWCAM's EAR (earphone)
jack.
When an earphone is plugged into the EAR jack, the
l
speaker automatically turns off.
To use the infrared remote control, make sure that the
l
remote control menu item ("REMOTE") is set to "ON".
The remote control cannot be used to operate the VIEW-
CAM when this menu item is set to "OFF". See page 29

VOLUME CONTROL

Press the PICTURE/VOLUME ADJUST button to
display the picture/volume/backlight control indi-
cators at the bottom of the monitor screen.
Press the VOLUME button to display the volume
indicator ("VOLUME").
Press the v button to decrease the volume, or
press the A button to increase the volume.
When you are finished, press the PICTURE/VOL-
UME ADJUST button to turn off the adjustment
indicators.