Sharp VL-E610S Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Camcorder
  5. ViewCam VL-E610S
  6. Service manual
Sharp VL-E610S Service Manual

Sharp VL-E610S Service Manual

Hide thumbs Also See for VL-E610S:
Table of Contents

Advertisement

Quick Links

1. SPECIFICATIONS ........................................................................................................................... 1-1
2. PART NAMES AND FUNCTION ...................................................................................................... 2-1
3. DISASSEMBLY OF THE SET .......................................................................................................... 3-1
4. MECHANISM ADJUSTMENT .......................................................................................................... 4-1
5. ADJUSTMENT OF VCR ................................................................................................................... 5-1
6. SYSTEM BLOCK DIAGRAM ........................................................................................................... 6-1
7. SCHEMATIC DIAGRAMS ............................................................................................................... 7-1
8. SEMICONDUCTOR LEAD IDENTIFICATION ................................................................................ 8-1
9. PRINTED WIRING BOARD ASSEMBLIES ..................................................................................... 9-1
10.REPLACEMENT PARTS LIST ...................................................................................................... 10-1
11.PACKING OF THE SET ................................................................................................................ 11-1
12.AC ADAPTER ............................................................................................................................... 12-1
SERVICE MANUAL
LIQUID CRYSTAL CAMCORDER
MODELS
In the interests of user-safety (Required by safety regula-
tions in some countries) the set should be restored to its
original condition and only parts identical to those specified
be used.
CONTENTS
SHARP CORPORATION
VL-E610S/VL-E610H
VL-E660S/VL-E96E
VL-E98E
S68R5VL-E610S
8
VL-E610S
VL-E610H
VL-E660S
VL-E96E
VL-E98E
Page
PAL

Advertisement

Table of Contents
loading

Related Manuals for Sharp VL-E610S

Summary of Contents for Sharp VL-E610S

  • Page 1: Table Of Contents

    VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E SERVICE MANUAL S68R5VL-E610S LIQUID CRYSTAL CAMCORDER VL-E610S VL-E610H VL-E660S VL-E96E VL-E98E MODELS In the interests of user-safety (Required by safety regula- tions in some countries) the set should be restored to its original condition and only parts identical to those specified be used.

  • Page 2: Specifications

    DC Output: 4.5 V Weight (approx.): 0.30 lbs (136 g) Power Consumption: 16 W Dimensions (approx.): 75 mm (W) × 51 mm (H) × 130 mm (D) Weight (approx.): 220 g *(VL-E610S, VL-E660S, VL-E96E) Specifications are subject to change without notice.

  • Page 3: Part Names And Function

    VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 2. PART NAMES AND FUNCTION For details on the use of each control.
  • Page 4 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E...

  • Page 5: Disassembly Of The Set

    VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 3. DISASSEMBLY OF THE SET 3-1. Removal of the camera section Note: Before removing the cabinet, turn off the power supply, and ascertain that the battery has been removed. 1. Remove one screw ((d)XiPSF20P04000), one screw ((b)LX-HZ0018TAFF), two screws ((a)LX-HZ0018TAFN), and pull out the camera front cabinet (1).
  • Page 6 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 5. Pulling the lens holder, and pull out the lens upwards. Then, remove the lens connector. Pull out Lens holder Lens connector 6. Remove one connector and two screws ((b)LX-HZ0018TAFF) and pull out the lens unit from the tilt frame C.
  • Page 7 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 3-2. Disassembly of the VCR main body 1. Removal of the VCR lid shaft (1)Remove one screw ((j)LX-HZ0063TAFC). Area A (2)Bring the jig (example: slotted precision screwdriver) into contact with the removal groove of the VCR lid shaft, and slide the screwdriver with care to prevent injuring the VCR lid and frame V.
  • Page 8 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E (3)Turn the tilt frame C so that the screwdriver can be easily inserted, and remove two screws ((i)XiPSN20P04000). Tilt frame C (4)Remove one screw ((i)XiPSN20P04000). (5)Remove the cabinet L to the midway, and disconnect the FPC connector.
  • Page 9 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E (3)Remove the microphone wire spacer from the Frame V. Microphone connector Frame V Microphone wire spacer Detail of area B (4)Pull out the microphone wire cable with care to prevent it from interfering with the mechanical parts, and remove the VCR lid.
  • Page 10 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 5. Disassembly of the LCD holder (1)Remove two screws ((d)XiPSF20P04000), pull out the tripod angle. Tripod angle (2)Remove the remote control ray reception PWB from the LCD, (Distorting the claw (snap-fit type) of the LCD holder, release its engagement.)
  • Page 11 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 6. Removal of the cassette compartment lid (1)Using the slotted precision screwdriver, push and turn the two claws (C and D) which fasten the cassette compartment lid, and the cassette compartment lid will be removed from the hook area of the cassette component.
  • Page 12 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 8. Disassembly of the LCD panel 1. Disengage two claws, and remove the lamp unit (1) from the LCD holder (2). 2. Remove the sheets from the LCD holder (2). 3. Pull the LCD holding sheet (3).
  • Page 13 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 3-3. REPLACEMENT OF CCD SENSOR 3-3-1. BEFORE REPLACEMENT 1) The CCD image sensor is more sensitive to electrostatic breakage than C-MOS LSI. Therefore sufficient means to prevent electrostatic damage must be taken when it is replaced. • Ground the soldering iron.
  • Page 14 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 3-4. INITIAL SETTING OF E PROM IC 3-4-1. E PROM data alterable ways 1) Set the switch of main body to VCR, and use the remote control (RRMCG0033TASA) for adjustment to turn on the adjustment mode. 2) VCR adjustment address setting.

  • Page 15: Mechanism Adjustment

    VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 4. MECHANISM ADJUSTMENT 4-1. Mechanism checking/adjusting jigs, tools and parts 4-1-1. Mechanism checking/adjusting jigs and tools Name Part No. Code Configuration Model, Uses Remarks Cassette torque JiG8T-012 • (10 g.cm/25 g.cm) meter for PB Cassette torque - JiG8T-032 •...
  • Page 16 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Name Part No. Code Configuration Model, Uses Remarks 10 Alignment tape VR2DBOPS TAPE CONTENTS VIDEO IMAGE AUDIO TIME MONOSCOPE L-CH 400Hz 30MIN R-CH 1,000Hz 11 Tension Band and JiGDRiVERMX7U2 BN Plate Adjusting Jig 12 Others (1) Calipers.
  • Page 17 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 4-2. Items and timings of inspection and maintenance The mechanism of VCR needs the following periodic inspection and maintenance in order that it maintains its high quality. Also, after the machine is repaired, execute the following maintenance and checks regardless of how long it has been used.
  • Page 18 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 4-2-2. Notes and cautions (1) Any cut washers, once removed for parts replacement or for other reason, must be replaced with new ones. (2) The mechanism of this VCR does not involve any volume adjustment. If the specified range is not satisfied, either cleaning or replacing the parts is required.
  • Page 19 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 4-3. Mechanism checks and adjustments The description given below relates to the general field services, but does not relate to the adjustment and replacement that require high level equipments, jigs, and technical skills. In order to maintain the initial characteristics of the machine, it is necessary to execute the maintenance and check and to prevent damage to tapes and other parts.
  • Page 20 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 4-3-2. Checking the take-up torque for playback (recording) (1) Set the torque cassette (8T-012) in position, and check in the SP-mode recording mode (tape recorded in SP mode) that the torque at the tape taking-up side is within the standard range.
  • Page 21 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Note: • Tightening torque of screw (1) 70 mN·m • To check the position, be sure to run the tape. • If the cassette compartment assembly is removed, it makes the work easier. (Refer to Item 4-5-3.) –...
  • Page 22 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 4-4. ADJUSTMENT OF MECHANISM TAPE TRAVEL SYSTEM Sup tilted pole Tu tilted pole A Tu GR Sup GR Tu tilted pole B Si roller Capstan shaft Tu guide Drum Tension pole Pinch roller Reel Tape travel system (Figure 1) 4-4-1.
  • Page 23 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 4-4-3. Adjusting the Si roller height After replacement of Si roller preset and adjust the Si roller height. (1) Si roller height presetting Adjust the height from the upper surface ofmechanism chassis to the upper surface of lower flange with the aid of jig.
  • Page 24 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E (2) Adjusting the Tu guide 1 Playback the alignment tape (VR2DBOPS) 2 Check that the tape runs at the same height near the capstan shaft in case of V/S F and V/S R. 3 If the tape running position in case of V/S R is higher than the tape running position in case of V/S F, turn clockwise the Tu guide nat.
  • Page 25 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E (2) Rise check 1 Playback the alignment tape (VR2DBOPS). 2 Once eject the cassette, and then load it again. 3 Set the playback mode, and ascertain that the RF waveform rises horizontally within 2 seconds. At this time ascertain that there is no tape slackness near the pinch roller.
  • Page 26 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 4-5. Mechanism assembling and parts replacement (disassembling and assembling) Below is given an explanation of assembling of mechanism and its parts replacement. The removal of cabinet and Circuit Board is explained in the relevant service manual. Notes 1 After removal of cut washers be sure to replace them with new ones.
  • Page 27 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E (2). S/B (Standby) mode (See Figure 2) When the cassette is loaded, the mechanism is set to the S/B mode. In this mode the slide chassis is most far from the drum. In this mode the Eject lever is in position shown in Figure 2 (in position where the cassette control ass’y can be locked).
  • Page 28 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 4-5-2. Cassette control ass’y <Disassembling> (1) Set the unit to the EJECT mode, and let the housing stand upright. Or set the unit to the STANDBY mode, press the lock lever in the arrow direction, and let the housing stand upright. (See Fig 5: in the direction...
  • Page 29 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 4-5-3. Actuating the mechanism with the cassette control ass’y removed (1) Turn on the power supply with the cabinet and camera unit removed, referring to the Service Manual (so as to actuate the mechanism). (2) Put the cap (2) on the light guide (1).
  • Page 30 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E (2) Drum motor stator Remove the stator mounting screw with the hexagonal wrench as shown in Figure 2, remove the motor stator. Phase matching hole Motor stator Stator mounting screw Upper/lower drum ass'y Figure 2 (3) Upper drum ass’y Remove the upper drum ass’y from the lower drum ass'y as shown in Figure 3.
  • Page 31 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E (5) Balancer Remove the balancer mounting screw as shown in Figure 5, and remove the balancer. Balancer mounting screw Balancer Upper drum ass'y Figure 5 (6) Lower drum ass'y Remove the FPC mounting screw from the lower drum ass'y as shown in Figure 6.
  • Page 32 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E In this state put the motor rotor on the upper surface of upper drum ass'y, and tighten the mounting screw. At this time make sure that the head screw in the three places is visible through the motor rotor hole (Figure 8). The screw tightening torque must be 0.1N·m (1 kg·cm).
  • Page 33 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E (7) Drum ass’y Install the drum ass’y on the main chassis, and tighten the screws (3 pcs.). (8) Tape guide Align the positioning pin, and tighten the screw (one pc.). 4-5-5. Phase matching The phase of the following parts must be matched as shown in the figure below.
  • Page 34 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E (4) Install the loading block assembly and the capstan motor. (5) Install the drive gear. At this time, pay attention to the direction of gear. (The small gear must be located in the chassis side.) Item Tightening torque Quantity A S Tight M1.4 x 2.5...
  • Page 35 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E (7) Install the guide rail assembly taking care to position it correctly. Item Tightening torque Quantity A S Tight M1.4 x 2.5 70mN·m B S Tight M1.4 x 4 40mN·m C ø0.8-ø3.0-t0.2 D ø2.1-ø5.0-t0.25 a S Tight M1.4 x 3 70mN·m...
  • Page 36 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E (8) Install the drum assembly in the chassis. (9) Install the tape guide in the drum assembly. (10) Install the Si roller. Item Tightening torque Quantity A S tight M1.7 x L5.3 100mN·m B S tight M1.7 x L2.5 60mN·m...
  • Page 37 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E (11) Install the slide chassis. Item Tightening torque Quantity A M1.4 x 1.5 ø4.0 40mN·m B M1.4 x 1.5 ø3.5 40mN·m T arm guide Slide this part towards the T arm. Place the slide chassis on the guide rail.
  • Page 38 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E (12) Install in the following order: T guide lever spring, T guide lever, pinch lever. (13) Install the swing arm. Item Tightening torque Quantity (14) Install the right guide holder. A S tight M1.4 x 2.5 70mN·m B CW ø0.8-ø3.0-t0.2...

  • Page 39: Adjustment Of Vcr

    VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 5. ADJUSTMENT OF VCR 5-1. ADJUSTMENT OF VCR SECTION 5-1-1. Before starting the electric circuit adjustment • Electric circuit adjustment becomes necessary, in most cases, when any of the wear mechanical parts or the video head has been replaced. Before starting the electric circuit adjustment, be sure to check that the mechanical parts work well (i.e., the mechanical parts have all been perfectly adjusted).
  • Page 40 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 5-1-2. Servicing the VCR section Adjustment 5-1-2-1. Typical connections Extension Cable etc. NAME PART NO. Code CONFIGURATION REMARKS Extension Cable Inverter~VCR (7pin) QCNW-1265TAZZ AX Extension Cable Camera~VCR (17pin) QCNW-1380TAZZ BD Extension Cable Camera~VCR (15pin) QCNW-1311TAZZ BA Extension Cable MECHA~VCR (70pin) QCNW-1534TAZZ BS...
  • Page 41 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E • Types of test modes TEST No. Title Contents Sensor on/off Sensors off All sensors but the cassette controller switch, dew sensor and battery sensor stay off. Automatic battery sensor Battery sensor’s input voltage put in memory.
  • Page 42 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Display Procedural steps ( : flashing) Turn up or down the flashing hexadecimal number with the FF or REW key to select the V ADJ address of a desired adjustment item. (Initial address: 00H) Note: The addresses change as follows.
  • Page 43 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 5-1-3. Adjusting the VCR circuit • Test Points on the Video Circuit Board 5-1-3-1. Adjusting the power circuit POWER CIRCUIT ADJUSTMENT PROCEDURE Turn on power (camera). 5. Check LCD 13.5V. 1. Adjust to CAM 15V. 6. Check LCD 7.0V.
  • Page 44 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E POWER CIRCUIT ADJUSTMENT METHOD Æ Input 6V from the battery terminal, and set the power switch to the camera side. 1. Adjustment to CAM 15V 1) Make an adjustment so that the digital voltmeter indi- Measuring instrument Digital voltmeter cates 15.0V ±...
  • Page 45 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Only in the case when the satisfactory result was not obtained by the adjusting method described above, perform the following adjustment. 1)Connect each signal to the oscilloscope. 1ch: Video output ... TL801 2ch: H-SW-P ..TL405 GND: GND ....TL802 2)Play back the alignment tape (JiGWR5-5CSP) 3)Press the “CONTINUOUS PUSH”...
  • Page 46 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 1. Adjustment of fixed data writing (1)Before starting Y/C adjustment, be sure to DATA write the specific data in the addresses listed left. If the data listed left is written after Y/C adjustment, adjusting values may deviate.
  • Page 47 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 5. Adjustment of Y-FM deviation Measuring instrument Oscilloscope Mode REC/PB (self-playback/recording) Input signal Color bar 1.0Vp-p Measuring point TL801 Adjustment address 34 1.0 Vp-p ± 40 mVp-p Adjustment level (1)Set the recordable tape. (2)Before entering the adjustment mode, make self-playback/recording of color bar with an external output.
  • Page 48 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 8. Adjustment of chroma emphasis f0 Measuring instrument Oscilloscope Minimum chroma component Mode VCR STOP Input signal Color bar Measuring point TL7402 Adjustment address 38 Adjustment level Minimum chroma component (1)Input the color bar signal into the video input/output terminal in the VCR STOP mode.
  • Page 49 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 5-1-7. Adjustment of LCD display circuit Adjustment procedures and connections are the same as with the VCR section. 1. Contrast adjustment Measuring point TL817 (G-OUT) Address Mode VCR AV input Adjusting method 1) Set the data of address 47 at the address 80.
  • Page 50 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 3. B-W/B adjustment Measuring point TL817 (G-OUT) TL818(B-OUT) Address Mode VCR AV input Adjusting method 1)AV input: Nonsignal. 2)TL817 (G-OUT): Oscilloscope CH1 3)TL818 (B-OUT): Oscilloscope CH2 4)Adjust P-P of TL818 become bigger 0.1V than TL817. Adjustment standard ±0.1Vp-p Remarks ———————...
  • Page 51 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 8. COM-BIAS adjustment Measuring point LCD panel display surface Address Mode VCR AV input Adjusting method 1)Input the white 40% signal as an AV input, and set data of address 47 at the address 80. 2)Set the illuminometer (TOPCON IM-3) on the LCD panel surface (do not allow entry of external light).
  • Page 52 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E • Connections for Camera Section Servicing Connect FPC 15pin between the camera and 17pin the VCR. QPWBH2814TAZZ LENS 20pin SC2 19 pin SC3 15 pin SC4 17 pin SC6 20 pin 20pin 19pin CCD PWB 19pin QPWBH2815TAZZ 5-2-2.
  • Page 53 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 5-2-2-2. Auto focus adjustment • Basic iris adjustment Measuring instrument None Subject — Tape — Test point None Adjustment address Adjustment level 09, 0A, 0B 1) Set up the auto focus adjustment mode. (Write 01 to the address 1FE) 2) Write the adjustment data 09, 0A and 0B one after the other to the address 1FF, the adjustment are as follows.
  • Page 54 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 5-2-2-4. • Iris AE adjustment Measuring instrument Oscilloscope Subject Gray scale Tape — 660mVp-p Test point VIDEO-OUT Adjustment address Adjustment level 660mVp-p 1) Shoot the gray scale in the standard way. Observe the VIDEO-OUT signal on the oscilloscope screen and rewrite the data of address 1FD to get an amplitude of 660mVp-p as shown above.
  • Page 55 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 5-2-2-8. • Color gain adjustment Measuring instrument Vector scope R spot Subject Color bar chart R level Tape — VIDEO OUT (Terminated in 75 Ω) 107° Test point Adjustment address R-Y GAIN 0DD B-Y GAIN 0DB Burst...
  • Page 56 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 5-3. TROUBLE SHOOTING 5-3-1. Classification of troubles û Check the Power circuit and system control cir- No function at all cuit. û Check the system control and loading motor No tape ejection circuit. û Check the inverter transformer and power circuit.
  • Page 57 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 5-19...

  • Page 58: System Block Diagram

    VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 6. SYSTEM BLOCK DIAGRAM NONREGE 3.6V BATTERY IC901 IC701 & Q701 3.3V POWER (CAMERA) POWER (SYS 3.3V) DC/DC Converter CONVERTOR IC501 POWER (AT 3.3V) IC703 CAMERA SYSTEM SERVO MICRO- CONTROLLER COMPUTER SERIAL BUS IC702 PROM PROM IC2701...
  • Page 59 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 6-1. VCR SECTION BLOCK DIAGRAM Y/C recording signal flow IC401 SC902 Y/C REC/PB processing circuit Connector P3301/SC305 IC301 SC301 CAM-C Head Amp. Connector From CAMERA COMB CAM-Y VIDEO HEAD 3 2 1 From VIDEO IN/OUT...
  • Page 60 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 6-2. VCR SECTION BLOCK DIAGRAM Y/C playback signal flow IC301 IC800 IC401 Y/C REC/PB processing circuit SC305/P3301 SC301 Head Amp SC46 Connector LCD PANEL DECORDER CONNECTOR From VIDEO HEAD DEMOD Q1403/Q1404 SC601 Connector Ω...
  • Page 61 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 6-3. VCR SECTION BLOCK DIAGRAM Drum/capstan servo system signal flow IC901 IC3701 IC3702 IC703 IC704 DRUMDRIVE DC/DC CAP DRIVE IC System controller/servo IC Amplifier Converter IC1701 ATF IC P3301 CAPSTAN FG ATF ERROR REC AFC...
  • Page 62 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 6-4. CAMERA SECTION BLOCK DIAGRAM 6-5. LENS DRIVE BLOCK DIAGRAM...

  • Page 63: Schematic Diagrams

    VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7. SCHEMATIC DIAGRAMS 7-1. OVERALL SCHEMATIC DIAGRAM...
  • Page 64 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-2. POWER CIRCUIT SCHEMATIC DIAGRAM å AND SHADED COMPONENTS=SAFETY RELATED PARTS å å å...
  • Page 65 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-3. AUDIO CIRCUIT SCHEMATIC DIAGRAM...
  • Page 66 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-4. MOTOR DRIVER SCHEMATIC DIAGRAM...
  • Page 67 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-5. LCD DISPLAY CIRCUIT SCHEMATIC DIAGRAM * See Page 7-21 When replacing the IC800 7-10...
  • Page 68 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-6. RF CIRCUIT SCHEMATIC DIAGRAM 7-11 7-12...
  • Page 69 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-7. SYSTEM CONTROL CIRCUIT SCHEMATIC DIAGRAM * See Page 7-22 When replacing the IC703,705 7-13 7-14...
  • Page 70 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-8. TG CIRCUIT SCHEMATIC DIAGRAM 7-15 7-16...
  • Page 71 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-9. Y/C CIRCUIT SCHEMATIC DIAGRAM * See Page 7-21 When replacing the IC401 7-17 7-18...
  • Page 72 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-10. D/A CIRCUIT SCHEMATIC DIAGRAM 7-19 7-20...
  • Page 73 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-11. SYSTEM/SERVO CONTROL AND Y/C INTERGRATED CIRCUIT SCHEMATIC DIAGRAM 7-21 7-22...
  • Page 74 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-12. CCD DELAY CIRCUIT SCHEMATIC DIAGRAM 7-23 7-24...
  • Page 75 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-13. ADC CIRCUIT SCHEMATIC DIAGRAM 7-25 7-26...
  • Page 76 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-14. DSP CIRCUIT SCHEMATIC DIAGRAM 7-27 7-28...
  • Page 77 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-15. CAM µ-COM CIRCUIT SCHEMATIC DIAGRAM (VL-E610S/E610H/E96E) 7-29 7-30...
  • Page 78 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-15. CAM µ-COM CIRCUIT SCHEMATIC DIAGRAM (VL-E660S/E98E) 7-31 7-32...
  • Page 79 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-16. LENS DRIVE CIRCUIT SCHEMATIC DIAGRAM 7-33 7-34...
  • Page 80 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-17. ZOOM CIRCUIT SCHEMATIC DIAGRAM 7-35 7-36...
  • Page 81 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-18. CCD CIRCUIT SCHEMATIC DIAGRAM 7-37 7-38...
  • Page 82 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 7-19. HEAD AMP CIRCUIT SCHEMATIC DIAGRAM 7-39 7-40...

  • Page 83: Semiconductor Lead Identification

    VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E RN1102 EX0179TA 8. SEMICONDUCTOR LEAD IDENTIFICATION Q1604 D805 MA132WA MA133 DX0182TA MA147 2SA1298Y DTC144EE 2SA1774F DTC323TK 2SA1832Y RN2104 2SB12956 2SD1328-S M52369FP 2SA1037KQ 2SC4555 DTA114EE 2SC4738 UN9213 2SC3931C 2SD2216 UN9113 DTA144EE DTC123EE 2SC4627C UN9110 2SC4617B...
  • Page 84 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 9. PRINTED WIRING BOARD ASSEMBLIES 9-1. P.W.B. Component Side SIDE A • This especially corresponds to å only. The number of units is as follows. • E660U : From 21st unit to 5020th unit (5,000 units) MAIN P.W.B.
  • Page 85 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 9-2. P.W.B. Wiring Side SIDE A MAIN P.W.B. CAMERA P.W.B.
  • Page 86 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 9-3. P.W.B. Component Side SIDE B MAIN P.W.B. R8843 R788 R8844 C8833 R2764 R1732 R1731 R1723 C8815 C8818 R8835 R8827 L905 L913 Q717 R2755 R1725 R1737 R2765 R1727 FL701 C912 R2766 R1734 R2748 R2759...
  • Page 87 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 9-4. P.W.B. Wiring Side SIDE B MAIN P.W.B. CAMERA P.W.B.
  • Page 88 VL-E610S/VL-E610H VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E660S/VL-E96E VL-E98E VL-E98E 9-5. HEAD AMP P.W.B. Wiring Side SIDE A Wiring Side SIDE B Component Side SIDE B 9-10...
  • Page 89 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 9-6. CCD P.W.B. Component Side Wiring Side SIDE A TL12 TL11 TL10 TL16 TL13 TL14 TL15 TL19 TL18 TL17 SIDE B 9-11...

  • Page 90: Printed Wiring Board Assemblies

    Q603 VS2SC4738Y/-1 Transistor DUNTK2800PM00 CCD Unit — Q701 VS2SB12956/-1 Transistor Q702 VSDTC144EE/-1 Transistor Q703 VSXP6501///-1 Transistor DUNTK2783QA00 VCR UNIT(VL-E610S) Q704 VSUMD2/////-1 Transistor DUNTK2783QA01 VCR UNIT(VL-E610H) Q714 VSUMT2/////-1 Transistor DUNTK2783QA02 VCR UNIT(VL-E96E) Q715 VSUPUMZ1///-1 Transistor DUNTK2783QA03 VCR UNIT(VL-E660S) Q721 VS2SA1774F/-1 Transistor...
  • Page 91 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code Q911 VSUMA4/////-1 Transistor Q8408 VS2SC5383F/-1 Transistor Q912 VSMPL1/////-1 Transistor Q8409 VS2SA1989R/-1 Transistor Q913 VS2SB1123//-1 Transistor Q8410 VSUMD2/////-1 Transistor Q914 VSUMD2/////-1 Transistor Q9401 VSUPUMX1///-1 Transistor Q915...
  • Page 92 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code å T901 L802 VPAXM470K1R7N Peaking 47µH RTRNZ0128TAZZ Transformer L803 VPAXM100KR42N Peaking 10µH CAPACITORS L804 VPAWM1R2JR78N Peaking 1.2µH 5% L805 VPAEM220J2R9N Peaking 22µH C402 VCKYCZ1CB103K 0.01...
  • Page 93 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code C451 VCSATA1AJ106M 10V Tantalum C704 VCKYCY1HB102K 1000p 50V Ceramic C453 VCCCCY1HH270J 50V Ceramic C705 VCKYCY1HB102K 1000p 50V Ceramic C454 VCKYCZ1CB103K 0.01 16V Ceramic C706 VCKYCY1HB102K...
  • Page 94 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code C819 VCCCCZ1HH6R0D 6.0p 50V Ceramic C890 VCSATJ1CJ226M 16V Tantalum C820 VCCCCZ1HH560J 50V Ceramic C900 VCEAPF1AW476M 10V Electrolytic C821 VCKYTV1CF105Z 16V Ceramic C902 RC-KZ0055TAZZ Capacitor C822 VCKYTV1CB474K 0.47...
  • Page 95 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code C1707 VCKYCY1HF103Z 0.01 50V Ceramic C3714 VCKYCY1HB682K 6800p 50V Ceramic C1708 VCKYCY1CF104Z 16V Ceramic C3715 VCKYCY1CF104Z 16V Ceramic C1709 VCKYCY1HF103Z 0.01 50V Ceramic C3716 VCSATA1AJ106M...
  • Page 96 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code C8407 VCKYCZ1CB103K 0.01 16V Ceramic R603 VRS-CZ1JF154J 150k 1/16W Metal Oxide AA C8408 VCCCCZ1HH330J 50V Ceramic R604 VRS-CZ1JF153J 15k 1/16W Metal Oxide AA C8411 VCKYCY1CB104K...
  • Page 97 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code R727 VRS-CZ1JF334J 330k 1/16W Metal Oxide AA R778 VRS-CZ1JF103J 10k 1/16W Metal Oxide AA R728 VRS-CZ1JF102J 1.0k 1/16W Metal Oxide AA R780 VRS-CZ1JF152J 1.5k 1/16W Metal Oxide AA...
  • Page 98 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code R859 VRS-CZ1JF683D 68k 1/16W Metal Oxide AB R930 VRS-CY1JFR22J 0.22 1/16W Metal Oxide AA R861 VRS-CZ1JF273J 27k 1/16W Metal Oxide AA R931 VRS-CZ1JF103J 10k 1/16W Metal Oxide AA...
  • Page 99 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code R1916 VRS-CZ1JF105J 1.0M 1/16W Metal Oxide AA R1967 VRS-CZ1JF272J 2.7k 1/16W Metal Oxide AA R1917 VRS-CZ1JF153D 15k 1/16W Metal Oxide AB R1968 VRS-CZ1JF220J 1/16W Metal Oxide AA...
  • Page 100 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code R3710 VRS-CZ1JF473J 47k 1/16W Metal Oxide AA R6410 VRS-CZ1JF152J 1.5k 1/16W Metal Oxide AA R3711 VRS-CZ1JF473J 47k 1/16W Metal Oxide AA R7401 VRS-CZ1JF332J 3.3k 1/16W Metal Oxide AA...
  • Page 101 P3301 QCNCM7068TAZZ Connector L202 VPAXM470K1R7N Peaking 47µH L203 VPAWM100K1R5N Peaking 10µH L204 VPAWM6R8MR90N Peaking 6.8µH 20% DUNTK2785QA03 CAMERA UNIT(VL-E610S/E610H) L205 VPABM3R9J1R6N Peaking 3.9µH 5% DUNTK2785QA04 CAMERA UNIT(VL-E96E) L207 VPAXM100KR42N Peaking 10µH DUNTK2785QA05 CAMERA UNIT(VL-E660S) L251 VPAXM100KR42N Peaking 10µH DUNTK2785QA06 CAMERA UNIT(VL-E98E)
  • Page 102 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code RC-KZ0051TAZZ Capacitor C256 VCKYCZ1HF103Z 0.01 50V Ceramic VCKYCZ1HB102K 1000p 50V Ceramic (VL-E660S/E98E) VCCCCZ1HH6R0D 6.0p 50V Ceramic C257 VCKYCZ1AF104Z 10V Ceramic RC-JZ0001TAZZ Capacitor (VL-E660S/E98E) C101 VCKYTV1AB105K...
  • Page 103 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code R105 VRS-CZ1JF682J 6.8k 1/16W Metal Oxide AA R527 VRS-CZ1JF224J 220k 1/16W Metal Oxide AA R106 VRS-CZ1JF563J 56k 1/16W Metal Oxide AA R528 VRS-CZ1JF102J 1.0k 1/16W Metal Oxide AA...
  • Page 104 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code QSOCN1786TAZZ Socket C342 VCCCCY1HH101J 100pF 50V Ceramic QSOCN0860TAZZ Socket C344 VCKYCY1CF104Z 0.1µF 16V Ceramic QSOCN2086TAZZ Socket C345 VCKYCY1CF104Z 0.1µF 16V Ceramic QSOCN1860TAZZ Socket C346 VCKYCY1HB102K...
  • Page 105 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTK2800PM00 CCD UNIT INTEGRATED CIRCUITS VHi24LC8BiN-1 24LC08BT-I/SN TRANSISTORS VS2SC4627CD-1 Transistor CAPACITORS VCKYCY1HB102K 1000p 50V Ceramic VCCCCY1HH2R0C 2.0p 50V Ceramic VCKYTV1HF103Z 0.01 50V Ceramic VCCCCY1HH221J 220p 50V Ceramic...
  • Page 106 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E MECHANISM CHASSIS EXPLODED VIEW Ref. No. Part No. Description Code Ref. No. Part No. Description Code 10-17...
  • Page 107 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code PSPAQ0010GEZZ Gap Adjusting Shim MECHANISM PARTS NRTR-0096GEZZ R Tr Rotor Ass'y MSPRC0209GEZZ Gr Adjusting Spring LPOLM0058GEZZ S Pole Base LCHSM0163GEZZ Main Chassis Ass'y LPOLM0059GEZZ T Pole Base...
  • Page 108 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code CASSETTE HOUSING PARTS CHLDX3077GE01 Cassette Compartment Assy MSPRT0414GEZZ Up Main Spring MROD-0014GEFJ Damper rod PDMP-0013GEZZ Cassette Compartment Damper —— End of Cassette Housing Parts ——...
  • Page 109 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E CABINET EXPLODED VIEW Ref. No. Part No. Description Code Ref. No. Part No. Description Code 6-16 6-14 6-13 6-12 6-10 6-15 6-11 10-20...
  • Page 110 Lamp Inverter Unit DCABD6090TAK1 Camera Rear Cabinet CPNLC0032RM01 LCD Panel Ass’y PZETV03A3TAZZ LCD Glass Retaining DCABD6088TAK1 Camera Rear Cabinet TLABM1822TAZZ Model Label(VL-E610S) Ass’y (VL-E98E) TLABM1823TAZZ Model Label(VL-E610H) JBTN-0276TASA Camera Button TLABM1827TAZZ Model Label(VL-E660S) DFTAC1259TAK1 VCR Lid Service TLABM1824TAZZ Model Label(VL-E96E)
  • Page 111 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code LHLDW1038TA00 FPC Holder QSW-Z0286TAZZ VCR Operation Unit QTANZ0129TAZZ Battery Terminal Unit QSW-Z0285TAZZ Power Unit LHLDZ1452TAZZ Power Lock Holder MSPRC0083TAFJ Power Lock Spring JBTN-0277TASA Power Button...
  • Page 112 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code CAMERA UNIT PARTS PCOVM8016TA00 Dustproof Rubber LANGK0324TAFW CCD Retaining Plate PFiLW0060TAZZ Optical Filter VHiLZ2423H5-1 CCD Sensor DUNTK2800PM00 CCD PWB Unit — LX-HZ0013TAFF Screw (1.7 X 6) ——...
  • Page 113 — TiNSE0293TAZZ Operation Manual(VL-E610H) AH SPAKC6837TAZZ Packing Case(VL-E96ER) — TiNSE0297TAZZ Operation Manual(VL-E610H) AD SPAKC6838TAZZ Packing Case(VL-E98EX) — TiNSL0110TAZZ Operation Manual(VL-E610S) AU SPAKC6839TAZZ Packing Case(VL-E98ER) — TiNSL0111TAZZ Operation Manual(VL-E610S) AU SPAKC6826TAZZ Packing Case(VL-E96EW) — TiNSL0112TAZZ Operation Manual(VL-E660S) BA SPAKP6049TAZZ Wrapping Paper —...

  • Page 114: Packing Of The Set

    VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 11. PACKING OF THE SET Ref. No. Part No. Description Code Ref. No. Part No. Description Code UBATM0011TAZZ (Battery) UBATL0004TAZZ (Lithium Battery x 2) ~UADP-0280TAZZ GCOVH1225TASA ~UADP-0281TAZZ (Lens Cap) (AC Adapter) QCNW-1338TA00 (DC Cable) ~QACCK0002TAZZ UBNDS0010TASA ~QACCB0016TAZZ...
  • Page 115 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code 10-26...

  • Page 116: Ac Adapter

    VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 12. AC ADAPTER UADP-0280TAZZ (VL-E610S/E96E/E98E/E660S) UADP-0281TAZZ (VL-E610H) UNIT No. Features • Compact and light-weight design for easier portability. • Automatic voltage change AC 110V to AC 240V allows the adapter usage even in your trips abroad. • Charging function with battery pack.
  • Page 117 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 12-1. OPERATION MANUAL 12-1-1. Outline This adapter is designed as a power supply for the camcorder as well as a quick charger for the battery used in the camcorder. As shown in the block diagram (Figure 12-1-1), the adapter consists of a separately excited switching regulator which uses the control IC and a multi-functional circuit at the secondary side.
  • Page 118 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E The timer is set to 180 minutes time limit to avoid overcharge which may be caused by -∆V detection error. Here, -∆V detection is set to 40 to 80mV. The third stage is trickle charging. In this mode, the fully charged state is kept even after the quick charging is completed.
  • Page 119 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 12-1-3. Circuits The circuits used for the adapter are explained according to the circuit diagram. 1.Input section The input section consists of noise filter and condenser input rectifying smoothing circuit. The noise filter, which consists of L1, C1, C50 and C51 reduces common mode noise.
  • Page 120 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E TROUBLE SHOOTING Adapter Mode The power lamp fails to light up. Check the fuse F1. Is the output No operation. D101 is defective. voltage output? Is the Q1 Q1 and IC1 are detective. oscillating? Is each output IC1 is defective.
  • Page 121 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 12-2. AC ADAPTER P.W.B. 12-6...
  • Page 122 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 12-7...
  • Page 123 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E 12-3. AC ADAPTER CIRCUIT SCHEMATIC DIAGRAM 12-8...
  • Page 124 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E REPLACEMENT PARTS LIST/ EXPLODED VIEWS · ADP MODE · CHG MODE PHOTO1 ELECTRICAL PARTS LIST H1 W1 H1 W1 700U 700U Parts marked with " å " are important for maintaining the safety of the 100V/DIV set. Be sure to replace these parts with specified ones for maintaining 5µSec/DIV...
  • Page 125 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code RESISTORS D103 95KUBY0032AB MA142WA ±5% å R1 D104 95KUBA0036AK RB721Q-40-T-72 95KUEEC105CH 1/2W å R2 ±5% D105 95KUBDAK5R6C RD5. 6ESAB2 95KUEEC105CH 1/2W ±5% å R3 D108 95KUBDAK6R8C RD6.
  • Page 126 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E Ref. No. Part No. Description Code Ref. No. Part No. Description Code ±5% CABINET PARTS R107 95KUEFD151BH 150 2W ±5% R108 95KUEEB224DC 220k 1/4W 95KLRZ6324ZP Sink, Heat ±5% R109 95KUEEC151CH 150 1/2W 95KLRZ6346ZK Sink, Heat 3.3k 1/10W ±1%...
  • Page 127 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E UADP-0280TAZZ UADP-0281TAZZ 12-12...
  • Page 129 VL-E610S/VL-E610H VL-E660S/VL-E96E VL-E98E COPYRIGHT C 1998 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Vl-e610hVl-e660sVl-e96eVl-e98e

Table of Contents