Recording The Date And Time - Sharp VL-E41X Operation Manual

DATE/TIME
*DISPLAY
l
SBLECT
MENU
A
*DISPLAY
*SELECT
7
6.1995
MENU
23
RECORDING THE DATE AND
Follow the procedure shown belpw to record the
date and time, or the date only, along with the sub-
Set the Operate switch to CAMERA. The VIEW-
CAM enters Recording Standby mode.
2
Press the MENU button to display MENU 1.
If MENU 2 is displayed, press the PAGE button
3
Press the v or A button to move the "k"
pointer to "DISPLAY".
4
Press the SET button to select "AUTO", "ON", or
DATE
"OFF"
2. 6.1995
When "ON" is selected, the date/time is contin-
uously displayed and recorded along with the
subject.
When "AUTO" is selected, the date/time is dis-
played and recorded for 10 seconds at the be-
ginning of the first recording that day.
OFF
DATE
When "OFF" is selected, the date/time is nei-
ther displayed nor recorded.
Note:
Select "AUTO" if continuous date/time display annoys
l
you during recording.
5
Press the 'I or A button to move the "b"
pointer to "SELECT".
6
Press the SET button to select "DATE +TIME" or
"DATE". Both the date and the time are display-
ed and recorded when "DATE + TIME" is select-
ed; only the date is displayed and recorded
when "DATE" is selected.
7
Press the MENU button to turn off the menu dis-
play, and then press the REC START/STOP but-
ton to start recording.
on the monitor.