Zooming - Sharp VL-E41X Operation Manual

Zooming in (when you want to centre attention on the subject)
Wide angle
Zooming out (when you want to show the surroundings)
MENU 2
*SELF REC
AUTO CORRECT
*SCREEN NORMAL
NORMAL

ZOOMING

Zooming allows you to move visually closer to or
farther from a subject without physically changing
your position.
In
To Zoom
Press the Power Zoom "T" (telephoto) button to get a
close-up view.
To Zoom Out
Press the Power Zoom "W" (wide angle) button to
get a wide field of view.
The on-screen display will show you the current
zoom setting.
Telephoto
You can select from two different zoom speeds to
match the type of subject you are recording.
Selecting the Zoom Speed
1
Set the Operate switch to CAMERA.
Press the MENU button to display MENU 2. If
MENU is displayed, press the PAGE button
Press the V or A button to move the "b"
pointer to "ZOOM SPEED".
Press the SET button to select the desired zoom
speed (NORMAL or SLOW).
When setting is completed, press the MENU but-
ton to turn off the menu display.