Error Messages - Sharp MD-MT200H Operation Manual

Error Messages

MD-MT200H
ENGLISH
ERROR MES-
SAGES


BATT EMPTY The battery has run down.


BLANK MD Nothing is recorded.
(Replace the disc with a recorded disc.)


Can't COPY You tried to record from a copy prohib-
ited MiniDisc.
(Record using the analogue cable.)


You tried to record signals other than
music (such as data).


Can't EDIT A track cannot be edited.
(Change the stop position of the track and
then edit it.)


Can't PLAY You tried to play back a track that can-
not be played with this equipment.


The disc data cannot be read because
Can't READ (*)
the disc is damaged.
(Reload the Minidisc or replace it with an-
other one.)


Can't REC Recording cannot be performed cor-
rectly due to vibration or shock.
E-39
MEANING ERROR MES-
SAGES
Can'tSTAMP
Can'tWRITE
DEFECT!
DISC FULL
Er-MD (**)
HOLD
LOCKED
NO DISC
Number or symbol appears in (*) position.
01/11/21
MEANING


Stamp function does not work.
(Check the number of tracks.)


Cannot save the TOC information cor-
rectly to a MiniDisc.


The disc is scratched.
(If the recorded sound is not right, retry
recording or replace the disc with a re-
cordable one.)


The disc is out of recording space.


The microprocessor has reported a
system fault and the unit is out of or-
der.
(To have it repaired, go to the distributor
where you purchased the unit.)


The unit is in the hold mode.


You removed a MiniDisc whilst record-
ing or editing.
(Turn off the power before removing the
MiniDisc.)


A disc has not been loaded.
MD-MT200H(SEEG)_E_6.fm