Wearing The Headphones; Hold Function - Sharp MD-MT200H Operation Manual

Wearing the Headphones

Hold Function

The present operation condition can be kept even if other
buttons are accidentally pressed in a place such as a
crowded train.
Main unit
Press the HOLD button for 2 seconds or more.
Hold Release
If the battery is inserted or the AC adaptor is connected, you
can set this function even when the power is turned off.
To cancel the hold mode
Press and hold down the HOLD button for 2 seconds or more
whilst the unit is in the hold mode.
1
Hold the headphone and unfold the ear clip.
2
Hook the ear clip on your ear.
3
Fold the ear clip and adjust the headphone to fit
your ear.
Remote control unit
Move the HOLD switch to the safety position
(direction indicated by the arrow).
Orange mark
Hold
To cancel the hold mode
Move the HOLD switch away from the safety position (the
opposite direction of the arrow).
If the hold function is active whilst the power is turned off,
the power cannot be turned on by mistake and the battery
will not be drained.
01/11/27 MD-MT200H(SEEG)_E_3.fm
MD-MT200H
ENGLISH
E-10