Recording - Sharp MD-MT200H Operation Manual

Recording

MD-MT200H
ENGLISH
Before recording
Cancel the hold mode.
The portable MD does not work whilst in the hold mode.
As for the details, see page 10.
1
Press the REC button.
2
Begin playback on the stereo system connected
to this portable MD.
E-11
3
Press the REC LEVEL or button to adjust
the recording level.
Analogue recording
The analogue recording level can be set from 0 - 30.
Adjust the recording level so that the maximum sound
volume from the source makes the reading swing
somewhere between -4 dB and 0 dB.
Level meter indicator
Digital recording
You can adjust the level in 1dB increments between
+12dB and -12dB.
+12dB to -12dB
Once you adjust the digital recording level, the setting
is retained even after the recording stops. (For cancel-
lation instructions, see page 29.)
4
Press the PAUSE button on the stereo system
to enter the playback pause mode.
Here you can search for the track to be recorded.
01/11/27 MD-MT200H(SEEG)_E_3.fm