Using With The Ac Adaptor - Sharp MD-MT200H Operation Manual

MD-MT200H
ENGLISH


About charging time
After about 3.5 hours have passed, "
go out. The battery will be charged up to about
90% of it's capacity if it started from a fully dis-
charged condition.
To charge the battery fully, continue charging for about 2
more hours. In this case, you do not need to press the
MENU/CHRG button. Even if the MENU/CHRG button is
pressed, " " will not appear.
Notes:


Charge the battery within the
range of 5° C - 35° C (41° F - 95° F).


The unit can be left in the charg-
ing state after it is completed.


Carry the battery in the supplied
case. Apply the case on the
Caution:


Use the specified battery AD-N55BT only. Do not
charge a battery (nickel-cadmium, alkaline, etc.) other
than that specified.


Do not remove the outer cover of
the rechargeable battery. It may
cause heat generation, fire, or ex-
plosion.


Do not dip the battery in water, do
not dispose of it in a fire, and do
not take it apart.


If the rechargeable battery terminal is dirty, charging
may not start. In such a case, wipe off the dirt with a
dry cloth.


Do not disassemble the battery.
E-7

Using with the AC Adaptor

Plug the AC adaptor into the wall socket, and then insert the
plug on the other end into the DC IN 5V socket.
" will
AC 230V, 50/60Hz
end.
Caution:


Insert the plugs firmly.


When the unit is not in use for extended periods, remove
the AC adaptor from the wall socket.
Note:
If power failure occurs whilst playing a disc using the AC
adaptor, disconnect it from the wall socket. Otherwise, play-
back may start automatically when electricity resumes.
01/11/27
To the DC IN 5V socket
MD-MT200H(SEEG)_E_2.fm