Sharp MD-MT200H Operation Manual page 33

Track intervals
When recording from the microphone, track numbers will
be created automatically at regular intervals (default set-
ting: approximately every 5 minutes). During a mic syn-
chro recording, the unit pauses when a silence lasts for 3
seconds or more, and creates a track number.
Changing intervals between tracks
1
Press the MENU/CHRG button repeatedly to se-
lect "MARK".
2
Press the ENTER/SYNC button.
3
Press the MENU/CHRG button.
(A new track number
(No automatic track
is created every 3 numbers are created.)
minutes.)
(A new track number
(A new track number
is created every 10
is created every 5
minutes.) minutes.)
The interval between marks may vary slightly com-
pared with the actual recording time.
4
Press the ENTER/SYNC button.
The mode will be set automatically after 7 seconds
even if the ENTER/SYNC button is not pressed.
5
Track numbers will be created automatically at
regular intervals.
Example: Set to "5 minutes".
During a mic manual recording
Timed auto marks will be created every 5 minutes.
Track Track Track
number 1 number 2 number 3
5 minutes 5 minutes 5 minutes
During a mic synchro recording
If a silence lasts for 3 seconds or more, a timed auto mark
will be created 5 minutes after the previous mark is created.
Track number which is created by the timed auto mark function.
Track number which is created when a silence lasts for 3 seconds
or more during synchro recording.
Track Track Track Track
number 1 number 2 number 3 number 4
2 minutes 5 minutes 1 minute 5 minutes
Creating track numbers manually


Press the REC button whilst recording.


The Dolby H/BASS button on the remote control can
also be used to add track numbers.
02/2/4 MD-MT200H(SEEG)_E_4.fm
MD-MT200H
ENGLISH
Track
number 4
Track
number 5
E-26