Playback - Sharp MD-MT200H Operation Manual

Playback

To the
REMOTE socket
L
R
Left
Right
channel
channel
1
Insert the headphones plug firmly into the head-
phones socket on the remote control.
2
Plug the remote control into the REMOTE sock-
et on the unit.
3
Insert a MiniDisc (page 8).
4
Press the button.
Playback starts automatically with a playback only
MiniDisc or a MiniDisc which is protected against
accidental erasure (Auto-play function).
To interrupt playback
Press the button.
To resume playback, press the button again.
To stop playback
Press the :OFF/HOLD button.
If the unit is not operated for at least 2 minutes whilst in
the stop mode, the power will shut off automatically.
To turn off the power
Press the :OFF/HOLD button whilst in the stop mode.


Volume control
Press the VOL+ button to increase the volume and the
VOL- button to decrease it.
Volume (0 - 30)
01/11/27 MD-MT200H(SEEG)_E_3.fm
MD-MT200H
ENGLISH
E-14