Changing Default Settings - Sharp MD-MT200H Operation Manual

Changing Default Settings

MD-MT200H
ENGLISH
Whilst in the stop mode ...
1
With a MiniDisc inserted, press the MENU/CHRG but-
ton for 2 seconds or more. "SET UP" will appear.
When you release the button, "BEEP" will appear.
2
Press the MENU/CHRG button to display the menu.
3
Press the ENTER/SYNC button.
4
Press the MENU/CHRG button to switch items.
5
Press the ENTER/SYNC button.
MENU
BEEP (Confirmation BEEP ON*
sound)
BEEP OFF
AUTO PLAY (Auto play) A-PLAY ON*
A-PLAY OFF
POWER SAVE (Auto AUTO Psave*
power save)
Psave OFF
D-LEVEL (Digital re- D.L MODE 1*
cording level)
D.L MODE 2
(*) indicates default setting.
E-29


Beep sound
You can eliminate the confirmation sound that beeps when
you press a button.


Auto play
You can make the unit not play automatically when you insert
a playback-only MiniDisc or an accidental erasure protected
MiniDisc.


Auto power save
When the unit is used in a place exposed to much vibration,
sound skipping can be decreased by cancelling the auto
power save function. (Battery will drain faster.)
What is auto power save function?
During playback, maximum 40 seconds (in stereo) of musical
SETTING ITEM
information is stored. Auto power save function automatically
Beep
adjusts the storage time between 5 and 40 seconds to
reduce the power consumption. If this function is cancelled,
Silent
the storage time cannot be adjusted.


If this unit is used with the AC adaptor, the storage time
Set.
will be 40 seconds regardless of the settings.


The storage time varies depending on the recording
Cancelled.
mode.


Set.
Digital recording level
Cancelled.
"D.L MODE 1"
The digital recording level you set will be kept even after
Setting re-
cancelling recording.
tained.
"D.L MODE 2"
Cancelled.
Every time you cancel recording, the level will return to
[D.L 0dB].
01/11/21 MD-MT200H(SEEG)_E_5.fm