Turning Led Off; Setting The Demo Mode; Fan Mode Setting; Memory Menu - Sharp XV-Z30000 Operation Manual

Adjusting the Projector Function ("PRJ-ADJ" Menu)
(Continued)

5 Turning LED Off

LEDs (indicators) on the projector can be turned
off when they are disturbing the projection.
Selectable
items
On LEDs are turned on.
Off LEDs are turned off while the projector
is in operation. (LEDs turn on while
the projector is in the Standby mode,
warming up or indicating problems.)
Note
• When Auto Power Off function is set to "Off",
"LED" is set to "On" automatically. Be sure to
set Auto Power Off function to "On" to use
LED Off function. (See page 54.)

Setting the Demo Mode

Set the Demo Mode to "On" or "Off".
Selectable
items
On This enables Demo Mode.
Off This disables Demo Mode.

Fan Mode Setting

This function changes the fan rotation speed.
Selectable
items
Normal Suitable for normal environments.
High Select this when using the projector at
altitudes of approximately 4,900 feet
(1,500 meters) or more.
• When "Fan Mode" is set to "High", the fan
rotation speeds up, and the fan noise
becomes louder.
56
Description
Description
Description
Menu operation n Page

8 Memory Menu

You can store the settings of the projector's
lens shift (ZOOM, FOCUS) and others (such as
INPUT, PICTURE MODE, RESIZE, PRJ Mode,
V-Image Shift, KEYSTONE and Anamorphic),
or activate the stored settings.
The Memory Menu screen can also be
displayed by pressing MEMORY on the
remote control.
a Load Memory
To activate the desired settings, select the
item where the settings are stored.
Note
• Pressing any button while the projector is in
the process of activating the "Load Memory"
function will display messages:
– "STOP": stops the activation of the "Load
Memory" function.
– "CONTINUE": allows the projector to the
already set position.
– "Return to the initial position.": let the
projector go back to the initial position.
• The confi rmation screen of "Load Memory"
will also be displayed by pressing MEMORY
1/2 on the remote control. Press MEMORY
1/2 again to perform the "Load Memory"
function.
• The memory has a margin of error of
approximately ±2%. Use the remote control to
make fi ne adjustments.
a Save Memory
Select an item where you want to store the
setting.
Note
• When you select an item where some setting
has been stored, the stored setting will be
overwritten and erased.
a Memory Name
Select the item name you want to change. Use
O/Q to choose the characters to change, and
P/R to select the characters to enter.
42