Operating Your Radio - Fm - Roberts Gemini RD-31 Manual

Operating your radio - FM

1. Carefully extend the telescopic aerial
2. Press the On/Off button to switch on your radio. The radio will tune
to the last selected radio station.
3. Press the FM/DAB button to select the FM band.
4. Press and release the Up button then press the Auto Tune button.
Your radio will search in an upwards direction (low frequency to high
frequency) and stop automatically when it finds a station of sufficient
strength.
5. If RDS information is being received, then after a few seconds the
display will update and show the radio station name.
6. To find other stations press the Auto Tune button as before.
7. If you press and release the Down button then press the Auto Tune
button, your radio will search in a downwards direction (high frequency
to low frequency) and stop automatically when it finds a station of
sufficient strength.
8. When the end of the waveband is reached your radio will recommence
tuning from the opposite end of the waveband.
9. Adjust the Volume and Tone controls to the required settings.
10. To switch off your radio press the On/Off button.
15
2
4,6
7
4,6,7
9
10
3
9
9