Using Cinema Color Editor; Setting Up Your Computer; System Requirements - Epson PowerLite Cinema 500 User Manual

Using Cinema Color Editor

You can use the Cinema Color Editor software that came with your projector to adjust each
color in the picture individually. You can also use the software in place of the remote control
to operate the projector, switch image sources, adjust the picture's aspect ratio, or change
image quality settings. Once you've adjusted the picture to your liking, you can save your
settings so you can easily recall them for future use.

Setting Up Your Computer

Before using Cinema Color Editor, follow the instructions in this section to install the
software and connect the projector to your computer.

System Requirements

You can install Cinema Color Editor on any Windows
minimum requirements:
Windows
®
Microsoft Windows 98 SE, 2000,
®
NT 4.0, Me, or XP
®
Pentium MMX , 166 MHz or better
TM
10MB RAM, 2MB hard disk space
XGA (1024
Macintosh
Macintosh OS 8.6 through 9.x, OS X
10.1.5 or later
Power Macintosh G3, 300 MHz or better
7MB RAM, 5MB hard disk space
768) or better display adapter and monitor
®
or Macintosh system that meets these
41