This section provides explanations on potential problems and the methods of taking care of
them.
I I I I Troubleshooting
When you think you have a problem, first of all check the Indicators on the projector.
The projector is fitted with Operation Indicator, Lamp Indicator and Temperature Indicator to
advise the user of the projector's status.
Operation Indicator
Indicator Status
Illuminated in
Stand-by status
Orange
Blinking in
Cool-down proce-
Orange
dure in progress
Illuminated in
Projection in
Green
progress
84 - Troubleshooting
Troubleshooting
Cause
(Not an error)
Projection will be started when the [Power]
button is pressed.
(Not an error)
· Wait for a moment. The acount of time for the
projector to cool down (cooling the lamp) will
depend on the external temperature, etc.
· The [Power] button cannot be used during
the cool-down period. This will be
illuminated in orange once the cool-down
process has been completed, so press the
button once more then.
(Not an error)
Operation Indicator
Lamp Indicator
Temperature Indicator
Recovery or Status
Reference
Page
42
49
42