Installation - Epson EMP-8150NL Owner's Manual

Installation

This section explains how to install the software using the Windows 98 screens. Software instal-
lation into the Windows 95 platform follows the same procedure.
Point
The EMP Link V users' guide will be installed onto the personal computer together with the
software in the PDF format. Acrobat reader is required to read this. If Acrobat Reader is not
available on the personal computer in use, it is recommended that it is installed at the same
time as EMP Link V.
G In the case of Windows
1
Start up Windows and set the CD-ROM in place.
The set-up program will start automatically.
Point
If the set-up program does not start automatically, open the [Specify and execute file name]
dialog box from the [Start] – [Specify and execute file name] menu, and enter [CD-ROM
drive name: \SETUP].
2
Select the language and the program to be installed and then press the [OK] button.
Installation will then commence. Proceed with all subsequent screens in accordance with
the instructions provided.
Point
The program can be un-installed by selecting each Software from the [My Computer] –
[Control Panel] – [Add and Delete Applications] menu and then executing [Add and Delete].
80 - Installation