Adjusting The Projection Position; Feet Adjustments - Epson EMP-8150NL Owner's Manual

I I I I Adjusting the projection position
The projector can be adjusted into the following vertical projection positions.

Feet adjustments

Adjusts the projection angle of the projector. As far as possible, make the necessary adjust-
ments while making sure that the projector is facing the screen at right angles.
1
Lift the Foot Adjust Lever with a finger and raise the front part of the projector.
The Front Foot will protrude.
2
Remove your finger from the Foot Adjust Lever, and then let go of the projector.
3
Rotate the lower part of the Front Foot to minutely adjust the height.
Point
· There are cases where the screen will be distorted into a trapezoid shape when foot
adjustments are performed. This trapezoid distortion can be adjusted with the use of the
trapezoid correction function. (see page 49)
· The Front Foot is restored by lifting the Foot Adjust Lever with a finger and lowering the
projector.
Foot Adjust Lever
Becomes lower
Becomes higher

Adjusting the projection position - 47