Setting" Menu - Epson EMP-53 User Manual

Using the Configuration Menu Functions Using the Configuration Menu Functions

"Setting" Menu

:
Video
Keystone Keystone
Audio
Auto Keystone Auto Keystone
Setting
No-Signal Msg. No-Signal Msg.
User's Logo
Prompt Prompt :
Advanced
Color Mode Prompt Color Mode Prompt
About
A/V Mute A/V Mute :
Reset All
Sleep Mode Sleep Mode
Reset Reset :
[ ]: Select [ ]: Enter
- +
0 0
:
ON OFF ON OFF
:
OFF OFF Black Black Blue Blue Logo Logo
ON ON OFF OFF
:
ON OFF ON OFF
Black Blue Black Blue Logo Logo
:
ON ON OFF OFF
Execute Execute
[Menu]: Exit
Sub-menu
Keystone Corrects vertical keystone distortion in images.
•When keystone correction is carried out, the projected
image will become smaller.
•If the images become uneven in appearance after keystone
correction is carried out, decrease the sharpness setting.
Auto Sets the function for automatically correcting keystone
Keystone distortion when the angle of the projector has been adjusted
to "ON" or "OFF". This function is only enabled when the
"Rear Proj. " and "Ceiling" commands in the "Advanced"
menu are set to "OFF". If either "Rear Proj. " or "Ceiling" is
set to "ON", this menu cannot be selected.
No-Signal Sets the message status and background colour at times such
Msg. as when no image signal is being input.
When set to "OFF", the background colour becomes black
and no message is displayed.
•To change the user's logo, you need to record your own
logo. p.81
Prompt Sets whether the input signal name is displayed on the screen
or not when the input signal is changed.
Color Sets whether the colour mode prompt is displayed on the
Mode screen or not when the colour mode is changed.
Prompt
A/V Mute Sets the screen status when the [A/V Mute] button on the
remote control is pressed.
•To change the user's logo, you need to record your own
logo. p.81
Sleep Sets the energy saving operation when no signal is being
Mode input.
•When set to "ON", projection stops automatically and then
after the cool-down
changes to sleep mode if no operations are carried out for
30 minutes while the "No-Signal." message is being
displayed. (The Power indicator lights orange.)
•Projection starts again when the [Power] button on the
projector's control panel or the remote control is pressed.
Function
period is finished, the projector
50
Default
Median value
(0)
ON
Blue
ON
ON
Black
OFF