Epson EMP-53 User Manual page 59

Using the Configuration Menu Functions Using the Configuration Menu Functions
Select a setting value.
5
Press the [ ] and [ ] buttons to change the setting value.
:
Brightness Control High Low
:
Startup Screen ON OFF
Color Adjustment :
Color Temp.
:
Rear Proj . ON OFF
:
Ceiling ON OFF
:
COM Port RS-232C USB
Language Select [English]
Execute
Reset
For items which are currently set, next to the setting appears
in green. If you use the [ ] and [ ] buttons to select an item to
be set, the will appear in orange. After making the selection,
press the [Enter] button to accept the setting. When the setting
is accepted, the changes to green.
TIP
• Sub-menu items which cause another sub-menu to be displayed
when they are selected have
items and press the [Enter] button, you can then change the settings
in the next sub-menu which appears.
• Refer to "List of Functions" for details on the functions of each
menu item. p.45
Select other menu items in the same way.
6
Repeat steps 2 to 5 to change the setting for other menu items.
To return to a previous menu, press the [ESC] button.
RGB Adjust
after them. If you select such menu
Close the menu.
7
Press the [Menu] button.
58