Epson EMP-53 User Manual page 71

When the Indicators Provide No Help When the Indicators Provide No Help
The image colours are not right
Has the image brightness been
adjusted correctly?
Are the cables connected correctly?
Do the input signal settings match the
signals from the connected device?
Has the image
adjusted correctly?
Has the colour been adjusted
correctly?
Have the colour intensity and tint been
adjusted correctly?
Is the lamp due for replacement?
When connecting to a computer
Images appear dark
Is the lamp due for replacement?
Has the image brightness been
adjusted correctly?
Has the image
adjusted correctly?
"Video" - "Brightness"
If the "Input Signal" command in the "Video" menu is set to "Computer" when a
component video
appear greenish. If the "Input Signal" menu command is set to "Component Video
(YCbCr
projected images will appear purplish. Select the correct signal format for the
connected source.
"Video" - "Input Signal"
contrast been "Video" - "Contrast"
"Advanced" - "Color Adjustment"
"Video" - "Color", "Tint"
When the lamp is nearly due for replacement, the image will become darker and
the colour quality will become poorer. When this happens, the lamp should be
replaced with a new one.
The colours may not exactly match the colours in the image on the computer
screen or LCD screen, but this is normal and is not the sign of a problem.
When the lamp is nearly due for replacement, the image will become darker and
the colour quality will become poorer. When this happens, the lamp should be
replaced with a new one.
"Video" - "Brightness"
contrast been
"Video" - "Contrast"
p.45, p.47
p.16–p.23
signal source is connected to the projector, the images will
)" or "Component Video (YPbPr
p.48
p.45, p.47
p.47
p.77
p.77
p.45, p.47
p.45, p.47
)" when a computer is connected, the
p.53
70